ICX 7150 stops working after power outage

[rahulmunjal]

I have a Rukus and two APs and every time there is an electricity trip the Rukus switch fails to connect to the internet and it just goes into an intermediate state where the devices keep connecting gf and disconnecting. All my devices like garage door, ring bell, switches, etc which use WiFi stop connecting. It takes a hell lot of multiple reboots of all modem, router, and switch and wait and watching for several hours or even days to stabilize the connection. I did check that the AP is on latest update but have no access to the switch itself to check the firmware version and upgrade. I see steps to connect via putty on windows but I do not have any windows machine at home (just iPads and Mac). This has been happening for about a year and I end up connecting directly to modem/router for my office work when I have to. Need help urgently to fix this situation. Thank you in advance. Let me know if any additional information is needed to understand and fix the issue.

[rahulmunjal]

Still not connecting to the switch 😞

Tried the cycle again but my laptop is not picking up the switch device.

What other options could I try?

[pinky_ruckus]

Hi @rahulmunjal ,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS setup is not working after the power outage..

Could you please let us know the answers to the below queries to assist you better?

1)  On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

2)  May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @rahulmunjal ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[rahulmunjal]

Hi Pinky - yes need help. I will have some time over the next weekend to get you the details requested. thank you for your patience.

[pinky_ruckus]

Hello @rahulmunjal ,

Than you for the response.

We will keep the case open until we have a response from you weekend.

Please keep us updated with the response as soon as you can get the pictures.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community