03-09-2021 12:39 PM
From Unit 1
Current stack management MAC is c0c5.208f.b839
SSH@SEBHSAvigilon#show run
Current configuration:
!
ver 08.0.90dT211
!
stack unit 1
module 1 icx7150-24p-poe-port-management-module
module 2 icx7150-2-copper-port-2g-module
module 3 icx7150-4-sfp-plus-port-40g-module
priority 200
stack-port 1/3/1
stack-port 1/3/3
stack unit 2
module 1 icx7150-24p-poe-port-management-module
module 2 icx7150-2-copper-port-2g-module
module 3 icx7150-4-sfp-plus-port-40g-module
stack-port 2/3/1
stack-port 2/3/3
stack unit 3
module 1 icx7150-24p-poe-port-management-module
module 2 icx7150-2-copper-port-2g-module
module 3 icx7150-4-sfp-plus-port-40g-module
stack-port 3/3/1
stack-port 3/3/3
--More--, next page:
SSH@SEBHSAvigilon#show stack
T=47m27.7: alone: standalone, 😧 dynamic cfg, S: static
ID Type Role Mac Address Pri State Comment
1 S ICX7150-24P alone c0c5.208f.b839 200 local None:0
2 S ICX7150-24P member 0000.0000.0000 0 reserve
3 S ICX7150-24P member 0000.0000.0000 0 reserve
4 S ICX7150-24P member 0000.0000.0000 0 reserve
5 S ICX7150-24P member 0000.0000.0000 0 reserve
6 S ICX7150-24P member 0000.0000.0000 0 reserve
+---+
3/1| 1 |3/3
+---+
Current stack management MAC is c0c5.208f.b839
From Unit 5
SEBHSAvigilon(config)#show stack
T=4d21h39m28.3: alone: standalone, 😧 dynamic cfg, S: static
ID Type Role Mac Address Pri State Comment
1 S ICX7150-24P member 0000.0000.0000 0 reserve
2 S ICX7150-24P member 0000.0000.0000 0 reserve
3 S ICX7150-24P member c0c5.208f.c059 0 remote Ready
4 S ICX7150-24P member 0000.0000.0000 0 reserve
5 S ICX7150-24P active c0c5.208f.bdd9 100 local Ready
6 S ICX7150-24P standby c0c5.208f.3879 0 remote Ready
active standby
+---+ +---+ +---+
3/1| 5 |3/3--3/1| 6 |3/3--3/1| 3 |3/3
+---+ +---+ +---+
Standby u6 - protocols ready, can failover
Current stack management MAC is c0c5.208f.b839
SSH@SEBHSAvigilon#show ver
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
(28660224 bytes) from Primary SPS08090d.bin (UFI)
SW: Version 08.0.90dT211
Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 07:08:55 2019
HW: Stackable ICX7150-24-POE
==========================================================================
UNIT 1: SL 1: ICX7150-24P-4X1G POE 24-port Management Module
Serial #:FEA3842Q0M7
Software Package: BASE_SOFT_PACKAGE
Current License: 4X10GR
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-4X10GF 4-port 40G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
--More--, next page: Space, next line: Return key, quit: Control-c
SEBHSAvigilon(config)#show ver
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 5: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
(28660224 bytes) from Secondary SPS08090d.bin (UFI)
SW: Version 08.0.90dT211
Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz1011 5)
Compiled on Thu Jan 31 07:08:55 2019
UNIT 3: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
(28660224 bytes) from Secondary SPS08090d.bin (UFI)
SW: Version 08.0.90dT211
Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz1011 5)
UNIT 6: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
(28660224 bytes) from Secondary SPS08090d.bin (UFI)
SW: Version 08.0.90dT211
Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz1011 5)
HW: Stackable ICX7150-24-POE
==========================================================================
UNIT 3: SL 1: ICX7150-24P-4X1G POE 24-port Management Module
Serial #:FEA3842Q0LR
Software Package: BASE_SOFT_PACKAGE
Current License: 4X10GR
==========================================================================
03-09-2021 12:42 PM
Hey Daniel,
I would recommend opening a support case on this one so one of our engineers can properly investigate. Can you confirm what code you were upgrading from? If it was something older, you need to use 8080F (non-ufi) as an intermediate hop.
03-09-2021 12:44 PM
I upgraded to 8080f first then up to 8090d ufi
03-09-2021 12:46 PM
Hey Daniel,
Thanks. I would definitely recommend opening a support case (see my signature) so we can do some proper analysis.
03-09-2021 12:56 PM
submitted