https://community.ruckuswireless.com/t5/ZoneDirector/C120-Issue/m-p/102332#M8466 <P>We have a customer with a Ruckus wireless network installed by a previous integrator.&nbsp; We are not dealers and it has been over 10 years since I regularly worked with Ruckus.&nbsp; The access points are no longer broadcasting and I cannot connect to the C120.&nbsp; It doesn't respond to ping either.&nbsp; The activity LED on LAN port 1 is solid green.&nbsp; Same thing on port 2.&nbsp; I don't know what this means other than, not working.&nbsp; I do, however, get normal flickering activity on the switch port.&nbsp; To make things worse, we don't seem to have a backup of the config and I imagine we are going to lose the licenses if we nuke this thing or buy one off eBay.</P><P>Any advice would be appreciated.</P><P>Thanks, Zach</P> Fri, 07 Feb 2025 17:35:09 GMT Zach 2025-02-07T17:35:09Z https://community.ruckuswireless.com/t5/ZoneDirector/C120-Issue/m-p/102332#M8466 <P>We have a customer with a Ruckus wireless network installed by a previous integrator.&nbsp; We are not dealers and it has been over 10 years since I regularly worked with Ruckus.&nbsp; The access points are no longer broadcasting and I cannot connect to the C120.&nbsp; It doesn't respond to ping either.&nbsp; The activity LED on LAN port 1 is solid green.&nbsp; Same thing on port 2.&nbsp; I don't know what this means other than, not working.&nbsp; I do, however, get normal flickering activity on the switch port.&nbsp; To make things worse, we don't seem to have a backup of the config and I imagine we are going to lose the licenses if we nuke this thing or buy one off eBay.</P><P>Any advice would be appreciated.</P><P>Thanks, Zach</P> Fri, 07 Feb 2025 17:35:09 GMT https://community.ruckuswireless.com/t5/ZoneDirector/C120-Issue/m-p/102332#M8466 Zach 2025-02-07T17:35:09Z