https://community.ruckuswireless.com/t5/ZoneDirector/Updating-ZD1100-Firmware/m-p/44213#M7972 <P>9.10 was the first release with TLS1.2. It's also the last release which runs on the ZD1100 (lucky!). It supports the ZF7372 &amp; R500.</P><P>You'll need to upgrade via 9.9 unless you don't mind re-setting everything up (9.8 - 9.10 will reset your ZD to factory defaults).</P> Wed, 02 Mar 2022 00:24:01 GMT ms264556 2022-03-02T00:24:01Z https://community.ruckuswireless.com/t5/ZoneDirector/Updating-ZD1100-Firmware/m-p/44185#M7970 <P>We are unable to access our ZoneDirector with any modern browser. I understand this is to do with the changes to SSL support. I also am aware that we are able to upgrade the firmware to fix this? Do you know what route we must take to upgrade the firmware? We have a mix of zf7372 and r500 APs which I don't want to lose access to by updating to an incompatible firmware.</P><P>Ruckus-ZoneDirector<BR />ZD1112<BR /><SPAN>9.8.1.0 build 101</SPAN></P> Fri, 25 Feb 2022 14:20:39 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Updating-ZD1100-Firmware/m-p/44185#M7970 themarshatron 2022-02-25T14:20:39Z https://community.ruckuswireless.com/t5/ZoneDirector/Updating-ZD1100-Firmware/m-p/44213#M7972 <P>9.10 was the first release with TLS1.2. It's also the last release which runs on the ZD1100 (lucky!). It supports the ZF7372 &amp; R500.</P><P>You'll need to upgrade via 9.9 unless you don't mind re-setting everything up (9.8 - 9.10 will reset your ZD to factory defaults).</P> Wed, 02 Mar 2022 00:24:01 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Updating-ZD1100-Firmware/m-p/44213#M7972 ms264556 2022-03-02T00:24:01Z https://community.ruckuswireless.com/t5/ZoneDirector/Updating-ZD1100-Firmware/m-p/44245#M7973 <P>That's great. Thank you for your help!</P> Wed, 02 Mar 2022 14:47:14 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Updating-ZD1100-Firmware/m-p/44245#M7973 themarshatron 2022-03-02T14:47:14Z