topic Re: ZD3000 doesn't generate IP for web GUI in ZoneDirector

ZD3000 doesn't generate IP for web GUI

tim_pritchard — Wed, 31 Aug 2016 11:58:09 GMT

Several ZD3000 added to inventory recently boot properly and get to the green light stage, but don't generate IPs to allow me to access web GUI for setup.

I've performed a factory reset - no change.

Any ideas how to fix this?

Re: ZD3000 doesn't generate IP for web GUI

michael_brado — Wed, 31 Aug 2016 16:15:40 GMT

If you are pressing the indented F/D button for 8+ seconds before release, the ZD's default IP address is 192.168.0.2 with uid/pw of admin/admin.

You need to pre-set your PC to an IP address in the 192.168.0.x range and connect Ethernet to either front port.

By default, the internal DHCP server will not be enabled.

Re: ZD3000 doesn't generate IP for web GUI

interface — Sat, 02 Dec 2023 11:44:51 GMT

Same to me i press F/D and also the Reset button, IP not found, use also IP Scanner

Re: ZD3000 doesn't generate IP for web GUI

syamantakomer — Tue, 12 Dec 2023 18:09:58 GMT

Hi @interface,

You have responded to a very old thread.

Please start a new post for faster and better answers.