topic Re: First using 7341, few question need to ask in ZoneDirector https://community.ruckuswireless.com/t5/ZoneDirector/First-using-7341-few-question-need-to-ask/m-p/41525#M7381 <UL> <BR /> <LI>9.6.2 is slightly newer, but I'm not aware of any compelling reasons to upgrade for a standalone AP configuration. <BR /> </LI><LI>Client isolation settings require a controller. <BR /> </LI><LI>The Aeroscout settings is a particular set of optimizations for those devices. Are you using AeroScout? If not, ignore that setting. <BR /> </LI><LI>Disabled is the most common setting. The others are used in particular corner-cases or with specific client devices that require it. <BR /> </LI></UL> <BR /> Hope this helps! Wed, 28 May 2014 21:37:52 GMT keith_redfield 2014-05-28T21:37:52Z First using 7341, few question need to ask https://community.ruckuswireless.com/t5/ZoneDirector/First-using-7341-few-question-need-to-ask/m-p/41524#M7380 Just get my first Ruckus 7341 today. Using UBNT before with bad experience.. <BR /> May i know which version is the latest firmware? 9.6.1.0.15?&lt;-default <BR /> How can i isolate clients? <BR /> What is the function for AeroScout RFID tag detection? <BR /> Protection mode should use which one? Protection Mode: Disabled CTS-only RTS-CTS Wed, 28 May 2014 19:37:17 GMT https://community.ruckuswireless.com/t5/ZoneDirector/First-using-7341-few-question-need-to-ask/m-p/41524#M7380 nelson_chai 2014-05-28T19:37:17Z Re: First using 7341, few question need to ask https://community.ruckuswireless.com/t5/ZoneDirector/First-using-7341-few-question-need-to-ask/m-p/41525#M7381 <UL> <BR /> <LI>9.6.2 is slightly newer, but I'm not aware of any compelling reasons to upgrade for a standalone AP configuration. <BR /> </LI><LI>Client isolation settings require a controller. <BR /> </LI><LI>The Aeroscout settings is a particular set of optimizations for those devices. Are you using AeroScout? If not, ignore that setting. <BR /> </LI><LI>Disabled is the most common setting. The others are used in particular corner-cases or with specific client devices that require it. <BR /> </LI></UL> <BR /> Hope this helps! Wed, 28 May 2014 21:37:52 GMT https://community.ruckuswireless.com/t5/ZoneDirector/First-using-7341-few-question-need-to-ask/m-p/41525#M7381 keith_redfield 2014-05-28T21:37:52Z