https://community.ruckuswireless.com/t5/ZoneDirector/Quick-question-zone-flex-7982/m-p/40018#M7097 <P style="margin: 0;">You probably can get R500/600/510/610 cheaper than ZF7982, and it would be much better choice - you'll have 802.11ac and can even use unleashed firmware with this newer APs (not latest, but it will be good enough)...</P> <P style="margin: 0;">Of cause, if you got one already or can buy it really cheap, it's still a good AP for home, even so it is old and supports just 802.11n, it is still enough for all realistic needs.&nbsp; &nbsp;</P> Tue, 01 Feb 2022 11:17:09 GMT eizens_putnins 2022-02-01T11:17:09Z https://community.ruckuswireless.com/t5/ZoneDirector/Quick-question-zone-flex-7982/m-p/40016#M7095 <P style="margin: 0;">Looking to buyingZoneFlex 7982 Access Point SCG Compatible: &nbsp;Do I need an controller to set it up or can I Login via web browser to set it up</P> Sun, 30 Jan 2022 16:46:12 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Quick-question-zone-flex-7982/m-p/40016#M7095 austin_kastner 2022-01-30T16:46:12Z https://community.ruckuswireless.com/t5/ZoneDirector/Quick-question-zone-flex-7982/m-p/40017#M7096 <P style="margin: 0;">Hi <A href="https://forums.ruckuswireless.com/users/61f6c0c9ba0bc973e320bed9" style="">@austin_kastner,</A></P> <P style="margin: 0;"></P> <P style="margin: 0;">ZF 7982 is already End of Life device, they are not supported on latest SZ firmware.</P> <P style="margin: 0;">You could setup through Web as well as CLI if you have one.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Regards,</P> <P style="margin: 0;">Parikshith</P> Mon, 31 Jan 2022 06:40:54 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Quick-question-zone-flex-7982/m-p/40017#M7096 Anonymous 2022-01-31T06:40:54Z https://community.ruckuswireless.com/t5/ZoneDirector/Quick-question-zone-flex-7982/m-p/40018#M7097 <P style="margin: 0;">You probably can get R500/600/510/610 cheaper than ZF7982, and it would be much better choice - you'll have 802.11ac and can even use unleashed firmware with this newer APs (not latest, but it will be good enough)...</P> <P style="margin: 0;">Of cause, if you got one already or can buy it really cheap, it's still a good AP for home, even so it is old and supports just 802.11n, it is still enough for all realistic needs.&nbsp; &nbsp;</P> Tue, 01 Feb 2022 11:17:09 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Quick-question-zone-flex-7982/m-p/40018#M7097 eizens_putnins 2022-02-01T11:17:09Z