topic How long should it take an AP to join up with a zone director? I can see it and it is approved but I can't edit, I need to change it's IP. in ZoneDirector https://community.ruckuswireless.com/t5/ZoneDirector/How-long-should-it-take-an-AP-to-join-up-with-a-zone-director-I/m-p/39660#M7033 How long should it take an AP to join up with a zone director? I can see it and it is approved but I can't edit it as I need to change it's IP. Sat, 15 Aug 2015 13:05:36 GMT et_venturer 2015-08-15T13:05:36Z How long should it take an AP to join up with a zone director? I can see it and it is approved but I can't edit, I need to change it's IP. https://community.ruckuswireless.com/t5/ZoneDirector/How-long-should-it-take-an-AP-to-join-up-with-a-zone-director-I/m-p/39660#M7033 How long should it take an AP to join up with a zone director? I can see it and it is approved but I can't edit it as I need to change it's IP. Sat, 15 Aug 2015 13:05:36 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-long-should-it-take-an-AP-to-join-up-with-a-zone-director-I/m-p/39660#M7033 et_venturer 2015-08-15T13:05:36Z Re: How long should it take an AP to join up with a zone director? I can see it and it is approved but I can't edit, I need to change it's IP. https://community.ruckuswireless.com/t5/ZoneDirector/How-long-should-it-take-an-AP-to-join-up-with-a-zone-director-I/m-p/39661#M7034 under 5 minutes if all is ok as per my experience.<BR /><BR />if yo can see it and is approved but can't edit then it means that AP is not in "connected" state.<BR /><BR />check the AP event and activities to see ZD-AP connection behaviour for clues.. Mon, 17 Aug 2015 12:13:02 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-long-should-it-take-an-AP-to-join-up-with-a-zone-director-I/m-p/39661#M7034 monnat_systems 2015-08-17T12:13:02Z Re: How long should it take an AP to join up with a zone director? I can see it and it is approved but I can't edit, I need to change it's IP. https://community.ruckuswireless.com/t5/ZoneDirector/How-long-should-it-take-an-AP-to-join-up-with-a-zone-director-I/m-p/39662#M7035 If you can ping APs, try SSH and login with ZD admin credentials.<BR />Do you see the ZD's IP when you type 'get director'?<BR /><BR />Else try 'set director ip <ZD_IP_ADDRESS>', followed by 'reboot'.<BR /><BR />This should send the AP's LWAPP request to the ZD on next boot up.<BR /><BR />Follow your Monitor/Access Points page Events/Activities log like Monnat suggested to see if it connects, or...?</ZD_IP_ADDRESS> Tue, 18 Aug 2015 20:56:52 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-long-should-it-take-an-AP-to-join-up-with-a-zone-director-I/m-p/39662#M7035 michael_brado 2015-08-18T20:56:52Z