topic Re: Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit in ZoneDirector https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39341#M6988 OK many thanks Keith. I will double check the ZD firmware version Wed, 14 May 2014 13:58:44 GMT jesus_olivas 2014-05-14T13:58:44Z Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39338#M6985 hello, I got this in the event log of the ZD: "Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit". But the ZD is licensed for 6 APs and has only 3 APs connected. Have you ever meet this before? Tue, 13 May 2014 20:56:41 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39338#M6985 jesus_olivas 2014-05-13T20:56:41Z Re: Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39339#M6986 What version of ZoneFlex are you running and what is the uptime of the ZD? <BR /><BR /> If the ZoneFlex firmware is ~8.x it's possibly a known issue with the ethernet drivers. Secondary however to something going horribly wrong on the ethernet side (such as DOS attack, broadcast storm, etc) <BR /><BR /> If you are under support, I recommend you grab the ZD Debug file, and open a support case. Tue, 13 May 2014 21:34:12 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39339#M6986 keith_redfield 2014-05-13T21:34:12Z Re: Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39340#M6987 Hello Jesus, <BR /><BR /> Not sure why this is happening however i just ran this error message in syslog message guide on PDF page 12 - <A href="https://support.ruckuswireless.com/documents/264-zonedirector-release-9-5-syslog-messages-guide/download" rel="nofollow">https://support.ruckuswireless.com/do...</A> <BR /><BR /> it says that its a critical event and you shall - Delete APs from the list to allow <BR /> new APs to join. <BR /><BR /> Do you have another ZD or AP's in the network? Wed, 14 May 2014 13:50:44 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39340#M6987 monnat_systems 2014-05-14T13:50:44Z Re: Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39341#M6988 OK many thanks Keith. I will double check the ZD firmware version Wed, 14 May 2014 13:58:44 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39341#M6988 jesus_olivas 2014-05-14T13:58:44Z Re: Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39342#M6989 Hello, <BR /> Many thanks for your answer. No, there are no other ZDs nor APs on the network. I will have a look at the AP list Wed, 14 May 2014 14:04:20 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Fail-to-initialize-the-configuration-of-all-AP-because-number-of/m-p/39342#M6989 jesus_olivas 2014-05-14T14:04:20Z