https://community.ruckuswireless.com/t5/ZoneDirector/DHCP-server-from-ZD1200/m-p/38125#M6798 <P style="margin: 0;">Hi Muhammad,</P> <P style="margin: 0;"></P> <P style="margin: 0;">I strenuously recommend you obtain the Administrator guide for the specific version of ZoneDirector software your ZD1200 is running.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Here is an excerpt from version 10.3 Administrator Guide:</P> <DIV title="Page 295"> <DIV> <DIV> <P style="margin: 0;"><SPAN style="">Ruckus recommends that you only enable the built-in DHCP server if there are no other DHCP servers on the network. </SPAN></P> <P style="margin: 0;"><SPAN style="">ZoneDirector's internal DHCP server can service only a single subnet (the one it's in) and not other VLANs that may be associated with client WLANs. If you enable the built-in DCHP server, Ruckus also recommends enabling the rogue DHCP server detector. For more information, refer to </SPAN><SPAN style="">Rogue DHCP Server Detection </SPAN><SPAN style="">on page 272. </SPAN></P> <OL style=""> <LI style=""> <P style="margin: 0;"><SPAN style="">Go to </SPAN><SPAN style="">System &gt; System Settings</SPAN><SPAN style="">. </SPAN></P> </LI> <LI style=""> <P style="margin: 0;"><SPAN style="">In the </SPAN><SPAN style="">DHCP Server </SPAN><SPAN style="">section, select the </SPAN><SPAN style="">Enable DHCP Server </SPAN><SPAN style="">check box. </SPAN></P> </LI> </OL> </DIV> </DIV> </DIV> <P style="margin: 0;">I hope that helps,<BR />Darrel.</P> Mon, 20 Dec 2021 09:56:04 GMT DarrelRhodes 2021-12-20T09:56:04Z https://community.ruckuswireless.com/t5/ZoneDirector/DHCP-server-from-ZD1200/m-p/38124#M6797 <P style="margin: 0;">I want to configure DHCP server on ZD1200. How could I configure this?</P> <P style="margin: 0;">In our scenario we have a single SSID. This is a flat network.&nbsp;</P> Mon, 20 Dec 2021 07:42:20 GMT https://community.ruckuswireless.com/t5/ZoneDirector/DHCP-server-from-ZD1200/m-p/38124#M6797 muhammad_islam 2021-12-20T07:42:20Z https://community.ruckuswireless.com/t5/ZoneDirector/DHCP-server-from-ZD1200/m-p/38125#M6798 <P style="margin: 0;">Hi Muhammad,</P> <P style="margin: 0;"></P> <P style="margin: 0;">I strenuously recommend you obtain the Administrator guide for the specific version of ZoneDirector software your ZD1200 is running.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Here is an excerpt from version 10.3 Administrator Guide:</P> <DIV title="Page 295"> <DIV> <DIV> <P style="margin: 0;"><SPAN style="">Ruckus recommends that you only enable the built-in DHCP server if there are no other DHCP servers on the network. </SPAN></P> <P style="margin: 0;"><SPAN style="">ZoneDirector's internal DHCP server can service only a single subnet (the one it's in) and not other VLANs that may be associated with client WLANs. If you enable the built-in DCHP server, Ruckus also recommends enabling the rogue DHCP server detector. For more information, refer to </SPAN><SPAN style="">Rogue DHCP Server Detection </SPAN><SPAN style="">on page 272. </SPAN></P> <OL style=""> <LI style=""> <P style="margin: 0;"><SPAN style="">Go to </SPAN><SPAN style="">System &gt; System Settings</SPAN><SPAN style="">. </SPAN></P> </LI> <LI style=""> <P style="margin: 0;"><SPAN style="">In the </SPAN><SPAN style="">DHCP Server </SPAN><SPAN style="">section, select the </SPAN><SPAN style="">Enable DHCP Server </SPAN><SPAN style="">check box. </SPAN></P> </LI> </OL> </DIV> </DIV> </DIV> <P style="margin: 0;">I hope that helps,<BR />Darrel.</P> Mon, 20 Dec 2021 09:56:04 GMT https://community.ruckuswireless.com/t5/ZoneDirector/DHCP-server-from-ZD1200/m-p/38125#M6798 DarrelRhodes 2021-12-20T09:56:04Z