topic Why does ZD and SZ restrict downgrading in running status? in ZoneDirector

Why does ZD and SZ restrict downgrading in running status?

hyosang_choi — Thu, 27 Oct 2016 01:40:25 GMT

Hi Dear.

Why does Ruckus block downgrading from ZD and SZ?

Especially, Why does ZD block downgrading to older version?

In ZD, if you would downgrading, must factory-set and re-configure from initial level.

Though you had done backup configuration, you don't resore new version(downgraded version) because the configuration didn't match f/w version.

I don't understand it.

Also ZD don't have cluster-backup/restore like SZ(exactly snapshot)

It's very inconvenient.

Do Ruckus have plan about flexible downgrading in further release?

Regards.

Re: Why does ZD and SZ restrict downgrading in running status?

martin_martin — Thu, 27 Oct 2016 07:04:14 GMT

Hi Jeronimo,

I think you gave the answer yourself already.
With a new version comes new features or database / config changes.
For that reason we push always the config backup on the ZD so you can roll back.
In that case use the upgrade function select the old firmware and after that upload the config backup of that version.

With SZ, we recommend to make a cluster backup, which is a full backup and you can restore to that also with the restore local command in CLI or via the webgui.

Kind regards
Martin

Re: Why does ZD and SZ restrict downgrading in running status?

hyosang_choi — Thu, 27 Oct 2016 07:31:19 GMT

Hi.

In zd, After downgrading for older version, we cannot import previouly config backup file.

If we import the file, ZD issue msg as "....mismatch fw version...."

Thus if we need to downgrading, we must re-start configration from initial setup.

Regards.
Jeronimo

Re: Why does ZD and SZ restrict downgrading in running status?

martin_martin — Thu, 27 Oct 2016 07:56:05 GMT

Hi Jeronimo

Let me try to explain in more detail

When you for example running version 9.8.3 on the ZD and you want to upgrade to 9.9 you are pushed before doing the upgrade the config backup for version 9.8.3. If you don't have that, you declined it before the upgrade.

So you should have the old config backup of your previous software installation.

Kind regards
Martin