topic ZD1112 supports r300 in ZoneDirector

ZD1112 supports r300

eduardo_morales — Thu, 15 Feb 2018 19:54:49 GMT

Hello, how are you?

We have a ZD1112 ZoneDirector controller, 9.6.1.0 build 15. We want to add some ap's, model r300. My question is: does the controller support that ap model?

Thank you in advance for your support.

Re: ZD1112 supports r300

lasha_chavleshv — Thu, 15 Feb 2018 20:06:41 GMT

yes . it has support

Re: ZD1112 supports r300

eduardo_morales — Thu, 15 Feb 2018 20:13:16 GMT

Thank you very much for your answer

Look, I have this screenshot of my ZD1112

Regards

Re: ZD1112 supports r300

max_o_driscoll — Thu, 15 Feb 2018 21:22:53 GMT

ZD1100 will support R300 from 9.7 firmware. You're running 9.6.

Upgrading to 9.7 needs planning/thinking, read release notes, make config backup.
Think about best time as it might take 60mins to get your network backup as all the APs will upgrade once the ZD has upgraded.

Note: If you go beyond 9.10 you will find that many legacy APs are not supported. Read those release notes.
Don't just download and upgrade expecting everything to work because it might not!

Re: ZD1112 supports r300

eduardo_morales — Fri, 16 Feb 2018 14:46:07 GMT

Thank you very much again

And where can I get version 7? What I did was look for an update from the interface, only that an error appears that it is not found.

I am new to the use of ZD

And yes, it will be something that takes time to implement

Re: ZD1112 supports r300

max_o_driscoll — Fri, 16 Feb 2018 16:35:56 GMT

This page: https://support.ruckuswireless.com/

To download firmware you'll need a support contract in place.

Re: ZD1112 supports r300

eduardo_morales — Fri, 16 Feb 2018 17:57:38 GMT

OK, got it. I really appreciate your help.

I am downloading the new version. Thank you very much.