topic ruckus 1200 in ZoneDirector

ruckus 1200

itdept_head_me — Tue, 14 Sep 2021 09:54:25 GMT

Have a 1200 on the latest firmware 10.5.0.0 build 190.

some clients are either:

1. loosing the pw for the wifi point

2. loosing the ip address on the client, but teh 1200 clearly shows the mac & ip address as authorized.

if I go into "client connectivity" then start a test, it is continually stopping at "4-way Handshake - Frame 4" then goes no further (zone director)

Every other client (apart from 2 or 3)runs past this & into the DHCP request.

But if I reboot the 1200, then it all clear up & issues a dhcp lease, but some time after that, the client trashes the DHCP again and ends up disconnected, even though the 1200 shows the mac & ip address

There is not a shortage of DHCP leases or ip addresses, besides the DHCP is still valid according to the AD server & 1200

I have never had this issue previously....

Re: ruckus 1200

syamantakomer — Tue, 14 Sep 2021 20:58:07 GMT

Hi,

Could you confirm the SSID configuration.

A screenshot of client connectivity will also help here.

Re: ruckus 1200

itdept_head_me — Wed, 15 Sep 2021 01:49:53 GMT

Hi,

I did a bit more work on this, by adding a mirror port to the same subnet.

for MOST other clients

I can clearly see DHCP requests coming in from 0.0.0.0 at the exatct time you see the DHCP request on the screen for Connectivity.....

but some clients are not even pushing a DHCP request, which either indicates step 4 failed or something on the machine interfering with DHCP processing.

I can also set the time for resetting, if no DHCP lease is seen in 10 seconds,in which case it just loops, without reaching the DHCP request.

signal quality is described as "excellent"

and another station...

In the mean time i dropped the firmware down to an earlier version and earlier config.... to cover bugs & mod "bases"

Re: ruckus 1200

itdept_head_me — Wed, 15 Sep 2021 01:57:14 GMT

SSID config

Re: ruckus 1200

itdept_head_me — Wed, 15 Sep 2021 06:05:15 GMT

Possibly something has changed on the captive gateway on the latest release?

zd1200_10.5.0.0.190.ap_10.5.0.0.190.img

I'm maybe seeing the AP continually trying to jam its crap into apple devices.

they are already set to "NOT" auto join this captive page

Could it be something with the captive page jamming & dumping existing connections, just to it not needing login for the wifi point?