https://community.ruckuswireless.com/t5/ZoneDirector/Sanitize-configuration-before-returning-to-factory/m-p/31307#M5943 I'm returning our ZoneDirector 1100 to factory, and I was able to factory reset it.  Are the configs stored anywhere else on the box that would need to be erased that the factory reset wouldn't get?  Thanks! Wed, 08 Apr 2020 20:51:26 GMT cliff_richie 2020-04-08T20:51:26Z https://community.ruckuswireless.com/t5/ZoneDirector/Sanitize-configuration-before-returning-to-factory/m-p/31307#M5943 I'm returning our ZoneDirector 1100 to factory, and I was able to factory reset it.  Are the configs stored anywhere else on the box that would need to be erased that the factory reset wouldn't get?  Thanks! Wed, 08 Apr 2020 20:51:26 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Sanitize-configuration-before-returning-to-factory/m-p/31307#M5943 cliff_richie 2020-04-08T20:51:26Z https://community.ruckuswireless.com/t5/ZoneDirector/Sanitize-configuration-before-returning-to-factory/m-p/31308#M5944 Is there a hard disk/flash disk in the chassis? if so, you may consider removing this, before you E-Waste the box. Wed, 08 Apr 2020 21:04:49 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Sanitize-configuration-before-returning-to-factory/m-p/31308#M5944 andrew_giancol1 2020-04-08T21:04:49Z