https://community.ruckuswireless.com/t5/ZoneDirector/Does-ZoneDirector-support-ARP-table-or-MAC-table-Like-show-arp/m-p/30933#M5876 Does ZoneDirector support ARP table or MAC table? Like 'show arp' or 'show mac-address'. If not, how it forwarding the L3 and L2 data? Mon, 05 Jan 2015 02:04:23 GMT mark_lee_700221 2015-01-05T02:04:23Z https://community.ruckuswireless.com/t5/ZoneDirector/Does-ZoneDirector-support-ARP-table-or-MAC-table-Like-show-arp/m-p/30933#M5876 Does ZoneDirector support ARP table or MAC table? Like 'show arp' or 'show mac-address'. If not, how it forwarding the L3 and L2 data? Mon, 05 Jan 2015 02:04:23 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Does-ZoneDirector-support-ARP-table-or-MAC-table-Like-show-arp/m-p/30933#M5876 mark_lee_700221 2015-01-05T02:04:23Z https://community.ruckuswireless.com/t5/ZoneDirector/Does-ZoneDirector-support-ARP-table-or-MAC-table-Like-show-arp/m-p/30934#M5877 Connected wifi clients are tagged with VLAN (if assigned) and dropped on the <BR /> AP switch, which registers the client device MAC addresses. The connected <BR /> clients do an ARP with DHCP when they are successfully authenticated, so the <BR /> switches/routers are maintaining L2/L3 tables. <BR /><BR /> An advanced option under WLAN, is to enable Proxy ARP, whereby the AP will <BR /> respond to wired side ARP requests toward any connected wireless client. For <BR /> WLANs tunneled to the ZoneDirector, the ZD can perform a dhcp relay. Tue, 06 Jan 2015 00:26:13 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Does-ZoneDirector-support-ARP-table-or-MAC-table-Like-show-arp/m-p/30934#M5877 michael_brado 2015-01-06T00:26:13Z