https://community.ruckuswireless.com/t5/ZoneDirector/Guest-Portal-URL/m-p/29137#M5637 That is exactly how it should work. When you install the wildcard certificate (*.domain.com) you should have been asked to provide a host name for the ZD. once that is done, any management access (direct management or webauth or Hotspot redirect should use the "<A href="https://hostname.domain.com" rel="nofollow">https://hostname.domain.com</A>" as the redirect and all you have to do is to make sure you DNS server have an entry for the FQDN pointing to the ZD's IP. <BR /><BR /> If this is not how it's working please contact support, something is not right either with the cert or with how it was installed on the system. <BR /><BR /> Have you tested the cert on another system to make sure that the management of that system is via the FQDN? Tue, 30 Dec 2014 18:19:02 GMT sid_sok 2014-12-30T18:19:02Z https://community.ruckuswireless.com/t5/ZoneDirector/Guest-Portal-URL/m-p/29136#M5636 Is there a way to change the guest portal settings to make the user land at the FQDN of the controller? I have a wildcard certificate for my domain which would be valid if the controller brought users to <A href="https://controller.domain.com" rel="nofollow">https://controller.domain.com</A>, but instead they are just being brought to <A href="https://controller" rel="nofollow">https://controller</A>. Tue, 30 Dec 2014 01:33:54 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Guest-Portal-URL/m-p/29136#M5636 eric_hoyt 2014-12-30T01:33:54Z https://community.ruckuswireless.com/t5/ZoneDirector/Guest-Portal-URL/m-p/29137#M5637 That is exactly how it should work. When you install the wildcard certificate (*.domain.com) you should have been asked to provide a host name for the ZD. once that is done, any management access (direct management or webauth or Hotspot redirect should use the "<A href="https://hostname.domain.com" rel="nofollow">https://hostname.domain.com</A>" as the redirect and all you have to do is to make sure you DNS server have an entry for the FQDN pointing to the ZD's IP. <BR /><BR /> If this is not how it's working please contact support, something is not right either with the cert or with how it was installed on the system. <BR /><BR /> Have you tested the cert on another system to make sure that the management of that system is via the FQDN? Tue, 30 Dec 2014 18:19:02 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Guest-Portal-URL/m-p/29137#M5637 sid_sok 2014-12-30T18:19:02Z