topic Re: Tunneling traffic between an AP and ZD in ZoneDirector https://community.ruckuswireless.com/t5/ZoneDirector/Tunneling-traffic-between-an-AP-and-ZD/m-p/28711#M5563 Should not be any problem, the only thing to keep an eye on is CPU load if you have a lot of APs/clients but that doesn't appear the case here. Fri, 11 Apr 2014 16:04:49 GMT keith_redfield 2014-04-11T16:04:49Z Tunneling traffic between an AP and ZD https://community.ruckuswireless.com/t5/ZoneDirector/Tunneling-traffic-between-an-AP-and-ZD/m-p/28710#M5562 Hi guys I have a question... <BR /> I have a ZF7372 at the office connected/talking via internet to a ZD1100 on our datacenter, and its working well, what I want to do is tunnel all traffic to the ZD to be able to go out the data center ISP instead of my ISP connection <BR /> Does anybody already did that? <BR /> thanks a lot <BR /> -nor Thu, 10 Apr 2014 23:23:20 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Tunneling-traffic-between-an-AP-and-ZD/m-p/28710#M5562 norberto_velazq 2014-04-10T23:23:20Z Re: Tunneling traffic between an AP and ZD https://community.ruckuswireless.com/t5/ZoneDirector/Tunneling-traffic-between-an-AP-and-ZD/m-p/28711#M5563 Should not be any problem, the only thing to keep an eye on is CPU load if you have a lot of APs/clients but that doesn't appear the case here. Fri, 11 Apr 2014 16:04:49 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Tunneling-traffic-between-an-AP-and-ZD/m-p/28711#M5563 keith_redfield 2014-04-11T16:04:49Z Re: Tunneling traffic between an AP and ZD https://community.ruckuswireless.com/t5/ZoneDirector/Tunneling-traffic-between-an-AP-and-ZD/m-p/28712#M5564 That should work pretty well. I use it to create a vpn tunnel from one office (where some APs are) to another office (more APs and the ZD controlling all of them). <BR /> Make sure you turn on the encryption though. <BR /><BR /> The nice thing of this tunnel is that it is on a lower level than traditional VPNs. You are not even using any ip addresses of the remote site, but going straight to the datacenter and get your ip addresses from there. This means that even if the remote site and the data center use the same IP ranges, there is no conflict. Sun, 13 Apr 2014 21:21:21 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Tunneling-traffic-between-an-AP-and-ZD/m-p/28712#M5564 jelle_alten_606 2014-04-13T21:21:21Z