https://community.ruckuswireless.com/t5/ZoneDirector/Allowing-connected-devices-to-communicate-with-each-other/m-p/26554#M5238 I will confess to being a networking newb right now. We recently replaced our Apple Airport Extreme with a Ruckus ZoneFlex R700 when the AirPort just ran out of coverage as our office grew. One issue that we are having with the R700 is that the devices that are connected to the R700 via wifi cannot connect to each other. We can't ssh to each others' machines, access each others' HTTP servers, or even ping one another. In fact, the printer is no longer available on the wifi. It's connected but not accessible from other machines. <BR /><BR /> Is there a setting somewhere to allow the connected devices on a R700 to see each other? <BR /><BR /> Thanks! Mon, 28 Jul 2014 19:58:08 GMT david_winters_6 2014-07-28T19:58:08Z https://community.ruckuswireless.com/t5/ZoneDirector/Allowing-connected-devices-to-communicate-with-each-other/m-p/26554#M5238 I will confess to being a networking newb right now. We recently replaced our Apple Airport Extreme with a Ruckus ZoneFlex R700 when the AirPort just ran out of coverage as our office grew. One issue that we are having with the R700 is that the devices that are connected to the R700 via wifi cannot connect to each other. We can't ssh to each others' machines, access each others' HTTP servers, or even ping one another. In fact, the printer is no longer available on the wifi. It's connected but not accessible from other machines. <BR /><BR /> Is there a setting somewhere to allow the connected devices on a R700 to see each other? <BR /><BR /> Thanks! Mon, 28 Jul 2014 19:58:08 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Allowing-connected-devices-to-communicate-with-each-other/m-p/26554#M5238 david_winters_6 2014-07-28T19:58:08Z https://community.ruckuswireless.com/t5/ZoneDirector/Allowing-connected-devices-to-communicate-with-each-other/m-p/26555#M5239 Hello David, <BR /><BR /> Before i could advise or suggest anything i need to ask few quickies: <BR /><BR /> Is it a standalone AP set up or ZD managed? <BR /> Are these devices able to get IP and reach internet? <BR /><BR /> regards <BR /><BR /> MS Thu, 31 Jul 2014 18:05:44 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Allowing-connected-devices-to-communicate-with-each-other/m-p/26555#M5239 monnat_systems 2014-07-31T18:05:44Z https://community.ruckuswireless.com/t5/ZoneDirector/Allowing-connected-devices-to-communicate-with-each-other/m-p/26556#M5240 Sounds like a single standalone AP. <BR /><BR /> If it is a single standalone AP, check the Configuration &gt; Ethernet Ports page, and check that the Ethernet ports are not set to "Isolated". If so, change it to "Bridge to WAN". <BR /><BR /> Hope it helps. Fri, 01 Aug 2014 08:06:40 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Allowing-connected-devices-to-communicate-with-each-other/m-p/26556#M5240 jay_files 2014-08-01T08:06:40Z