topic Re: trying out P2P ZF7731 for bridging want to have two links with one as a failover/redundancy is this possible in ZoneDirector https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26097#M5180 If mounting the 7731s on the same pole, separate them by at least 1m/3ft...<BR />Depending on switches/features you might be able to load-balance, or STP might shut down one link. Wed, 22 Jul 2015 21:49:16 GMT michael_brado 2015-07-22T21:49:16Z trying out P2P ZF7731 for bridging want to have two links with one as a failover/redundancy is this possible https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26094#M5177 trying out P2P ZF7731 for bridging network between remote Gateway and main network , so we want a couple links with one being a failover in case other goes down is this possible with ZF7731 Tue, 21 Jul 2015 17:12:56 GMT https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26094#M5177 george_esparza_ 2015-07-21T17:12:56Z Re: trying out P2P ZF7731 for bridging want to have two links with one as a failover/redundancy is this possible https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26095#M5178 Hi George,<BR />&nbsp;&nbsp; You can setup two pairs of 7731, in parallel but on different channels, providing double the bandwidth/throughput, and if one 7731 ever lost power/is rebooted, the second link maintains your connectivity.&nbsp; This is somewhat better than an unused "backup" link. Tue, 21 Jul 2015 23:25:31 GMT https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26095#M5178 michael_brado 2015-07-21T23:25:31Z Re: trying out P2P ZF7731 for bridging want to have two links with one as a failover/redundancy is this possible https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26096#M5179 sounds good , is it really that easy any other details we need to take care of&nbsp; or configurations on switches Wed, 22 Jul 2015 20:46:12 GMT https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26096#M5179 george_esparza_ 2015-07-22T20:46:12Z Re: trying out P2P ZF7731 for bridging want to have two links with one as a failover/redundancy is this possible https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26097#M5180 If mounting the 7731s on the same pole, separate them by at least 1m/3ft...<BR />Depending on switches/features you might be able to load-balance, or STP might shut down one link. Wed, 22 Jul 2015 21:49:16 GMT https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26097#M5180 michael_brado 2015-07-22T21:49:16Z Re: trying out P2P ZF7731 for bridging want to have two links with one as a failover/redundancy is this possible https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26098#M5181 we have a extra &nbsp;Barracuda link Balancer (hardware)&nbsp;, if we had one for each side would that help&nbsp;with &nbsp;making &nbsp;connections&nbsp; and managing/monitoring &nbsp;links Thu, 23 Jul 2015 16:48:35 GMT https://community.ruckuswireless.com/t5/ZoneDirector/trying-out-P2P-ZF7731-for-bridging-want-to-have-two-links-with/m-p/26098#M5181 george_esparza_ 2015-07-23T16:48:35Z