topic Re: How do you disable the inactivity timeout on a WLAN in a ZoneDirector? in ZoneDirector

How do you disable the inactivity timeout on a WLAN in a ZoneDirector?

niko_englebert — Fri, 12 Dec 2014 19:15:26 GMT

I noticed the verbiage in the CLI of the ZD for the inactivity timeout:

inactivity-timeout
Enables and Sets the inactivity timeout time to the speficied numb
minutes.

Given that it says it enables and sets it, this leads me to believe there is a way to disable it. Could anyone please provide me some guidance as to how you go about disabling inactivity timeout for a WLAN if at all possible?

Re: How do you disable the inactivity timeout on a WLAN in a ZoneDirector?

michael_brado — Tue, 16 Dec 2014 01:41:02 GMT

Sorry Niko, the ZD CLI verbage is mis-leading. Inactivity timeout cannot be entirely
disabled, and has a maximum of 500 minutes. (*except 9.7.2.0.9 and 9.8.0.0.369
had a reduced 10 minute max, identified and fixed by ER-1553 in later releases)

Re: How do you disable the inactivity timeout on a WLAN in a ZoneDirector?

niko_englebert — Tue, 16 Dec 2014 02:29:26 GMT

Alright, thanks for your help, Michael!

Re: How do you disable the inactivity timeout on a WLAN in a ZoneDirector?

monnat_systems — Tue, 16 Dec 2014 16:19:22 GMT

Hi Niko,

I know your question was specfic to CLI however just in case scenario you can try GUI options

--> Configure TAB --> WLAN --> Advanced options --> Inactivity Timeout.

Take a look at the screenshot on URL -- http://prntscr.com/5hi3p2

hope this helps.