https://community.ruckuswireless.com/t5/ZoneDirector/Can-you-set-up-the-DHCP-to-only-present-to-certain-SSID-s/m-p/21741#M4414 I don't think that will work well for you, but you can probably get your existing DHCP server to hand out different scopes for different VLANs. So you'd put the guest WLAN on it's own VLAN and when the client sends a DHCP request the server will respond with the proper scope. Wed, 04 Dec 2013 00:25:15 GMT keith_redfield 2013-12-04T00:25:15Z https://community.ruckuswireless.com/t5/ZoneDirector/Can-you-set-up-the-DHCP-to-only-present-to-certain-SSID-s/m-p/21740#M4413 We are trying to configure a guest wireless as well as a company wireless. We already have a DHCP server for the company but would like to make sure all computers on the guest wireless also get their own DHCP on a completely different subnet. Is it possible to turn on the Ruckus DHCP on the ZoneDirector and specify that it only act on our guest wireless? Mon, 02 Dec 2013 22:54:18 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Can-you-set-up-the-DHCP-to-only-present-to-certain-SSID-s/m-p/21740#M4413 daniel_cox_6157 2013-12-02T22:54:18Z https://community.ruckuswireless.com/t5/ZoneDirector/Can-you-set-up-the-DHCP-to-only-present-to-certain-SSID-s/m-p/21741#M4414 I don't think that will work well for you, but you can probably get your existing DHCP server to hand out different scopes for different VLANs. So you'd put the guest WLAN on it's own VLAN and when the client sends a DHCP request the server will respond with the proper scope. Wed, 04 Dec 2013 00:25:15 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Can-you-set-up-the-DHCP-to-only-present-to-certain-SSID-s/m-p/21741#M4414 keith_redfield 2013-12-04T00:25:15Z