https://community.ruckuswireless.com/t5/ZoneDirector/Client-Isolation-White-list-IPV6/m-p/20697#M4287 I am running both IPV4 and IPV6. The white list works with just the MAC address for the gateway. However I want a printer to be reachable by all clients. If I put just the MAC address of the printer it does not work. I have to put the IPV4 addresses for all entries and it works. However that breaks IPV6. I also tried putting the printer IPV4 address in a layer 3 access list. Once client isolation was turned on it became unreachable. Will we ever be able to put both IPV4 and IPV6 in a white list for client isolation? Fri, 08 Jan 2016 21:16:11 GMT jim_kennedy_765 2016-01-08T21:16:11Z https://community.ruckuswireless.com/t5/ZoneDirector/Client-Isolation-White-list-IPV6/m-p/20697#M4287 I am running both IPV4 and IPV6. The white list works with just the MAC address for the gateway. However I want a printer to be reachable by all clients. If I put just the MAC address of the printer it does not work. I have to put the IPV4 addresses for all entries and it works. However that breaks IPV6. I also tried putting the printer IPV4 address in a layer 3 access list. Once client isolation was turned on it became unreachable. Will we ever be able to put both IPV4 and IPV6 in a white list for client isolation? Fri, 08 Jan 2016 21:16:11 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Client-Isolation-White-list-IPV6/m-p/20697#M4287 jim_kennedy_765 2016-01-08T21:16:11Z