https://community.ruckuswireless.com/t5/ZoneDirector/zone-director-not-working-after-firmware-upgrade/m-p/19503#M4114 Hello I have same Problem after new Start. <BR /> I connect a console-Cable. <BR /><BR /> I see Startupmessage... <BR /><BR /> The last ist: <BR /> max trans len 1024, max batch 900, max commit age 30, max trans age 30 <BR /> ReiserFS: sda4: checking transaction log (sda4) <BR /> watchdog_task: 35 seconds since last rsmd update <BR /><BR /> watchdog_task .... <BR /><BR /> -------------------------------&gt; <BR /> go to : <BR /> 1200 Sek later... <BR /> -----------------------------&gt; <BR /><BR /> watchdog_task: 1200 seconds since last rsmd update <BR /><BR /> watchdog_task: nWDT device closed unexpectedly. WDT will not stop! <BR /> o rsmd update in 1205 seconds, watchdog exit!!! <BR /><BR /> watchdog_task: exiting <BR /><BR /> *** soft watchdog stopped *** <BR /> --&gt; initializing oops_hdr(0xa7ff0000)[size=64512]: total_boot=1 Image: type=1 in <BR /> dex=1 <BR /><BR /> @ j=fd280, c0=164a0927 <BR /> Watchdog Timeout ! @ jiffies=fd280, c0_count=16576bed <BR /><BR /> @ jiffies=fd280, c0_count=1672b05c <BR /> cpu 15 0 747 1044 131878 0 6 0 <BR /> processes 118 procs_running 0 procs_blocked 1 <BR /> mem(kB) 126484 102504 16800 1928 1760 17496 <BR /> Current: pid=0 state=00 <BR /><BR /> Then Start Machine new...... Sun, 22 Sep 2013 16:57:14 GMT hans_j_huber 2013-09-22T16:57:14Z https://community.ruckuswireless.com/t5/ZoneDirector/zone-director-not-working-after-firmware-upgrade/m-p/19502#M4113 Hi! I have upgraded my zonedirector 1100 from 9.3.4.0.21 to 9.5.1.0.50 and now it is not working... unable to ping it. status led is not blinking, unable to do a factory restore. Any idea what to do? <BR /><BR /> Regards Blaž Sat, 21 Sep 2013 21:46:05 GMT https://community.ruckuswireless.com/t5/ZoneDirector/zone-director-not-working-after-firmware-upgrade/m-p/19502#M4113 blaz_pajk 2013-09-21T21:46:05Z https://community.ruckuswireless.com/t5/ZoneDirector/zone-director-not-working-after-firmware-upgrade/m-p/19503#M4114 Hello I have same Problem after new Start. <BR /> I connect a console-Cable. <BR /><BR /> I see Startupmessage... <BR /><BR /> The last ist: <BR /> max trans len 1024, max batch 900, max commit age 30, max trans age 30 <BR /> ReiserFS: sda4: checking transaction log (sda4) <BR /> watchdog_task: 35 seconds since last rsmd update <BR /><BR /> watchdog_task .... <BR /><BR /> -------------------------------&gt; <BR /> go to : <BR /> 1200 Sek later... <BR /> -----------------------------&gt; <BR /><BR /> watchdog_task: 1200 seconds since last rsmd update <BR /><BR /> watchdog_task: nWDT device closed unexpectedly. WDT will not stop! <BR /> o rsmd update in 1205 seconds, watchdog exit!!! <BR /><BR /> watchdog_task: exiting <BR /><BR /> *** soft watchdog stopped *** <BR /> --&gt; initializing oops_hdr(0xa7ff0000)[size=64512]: total_boot=1 Image: type=1 in <BR /> dex=1 <BR /><BR /> @ j=fd280, c0=164a0927 <BR /> Watchdog Timeout ! @ jiffies=fd280, c0_count=16576bed <BR /><BR /> @ jiffies=fd280, c0_count=1672b05c <BR /> cpu 15 0 747 1044 131878 0 6 0 <BR /> processes 118 procs_running 0 procs_blocked 1 <BR /> mem(kB) 126484 102504 16800 1928 1760 17496 <BR /> Current: pid=0 state=00 <BR /><BR /> Then Start Machine new...... Sun, 22 Sep 2013 16:57:14 GMT https://community.ruckuswireless.com/t5/ZoneDirector/zone-director-not-working-after-firmware-upgrade/m-p/19503#M4114 hans_j_huber 2013-09-22T16:57:14Z