https://community.ruckuswireless.com/t5/ZoneDirector/Authenticate-AD-user-group/m-p/19409#M4090 I was that I could set up a WLAN to authenticate to a specific group of users on an AD server. Is that true and if so, how do I set that up? I only see where I can chose the AD server to authenticate to, but not a user group within the AD. Tue, 26 Nov 2013 19:07:15 GMT jj_buckingham 2013-11-26T19:07:15Z https://community.ruckuswireless.com/t5/ZoneDirector/Authenticate-AD-user-group/m-p/19409#M4090 I was that I could set up a WLAN to authenticate to a specific group of users on an AD server. Is that true and if so, how do I set that up? I only see where I can chose the AD server to authenticate to, but not a user group within the AD. Tue, 26 Nov 2013 19:07:15 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Authenticate-AD-user-group/m-p/19409#M4090 jj_buckingham 2013-11-26T19:07:15Z https://community.ruckuswireless.com/t5/ZoneDirector/Authenticate-AD-user-group/m-p/19410#M4091 When authenticating a particular user at the AD the ZD will receive to which group it belongs. Then it's your job to setup the correct roles in the Configure :: Roles part, so that the ZD will know to which group to apply the user to. <BR /><BR /> I suggest you read the UG on page 214. If you get stuck write again. <BR /> <A href="https://support.ruckuswireless.com/documents/357-zonedirector-release-9-6-user-guide/download" rel="nofollow">https://support.ruckuswireless.com/do...</A> Wed, 27 Nov 2013 07:11:44 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Authenticate-AD-user-group/m-p/19410#M4091 primoz_marinsek 2013-11-27T07:11:44Z