topic Capturing frames on stand-alone APs in ZoneDirector https://community.ruckuswireless.com/t5/ZoneDirector/Capturing-frames-on-stand-alone-APs/m-p/17359#M3722 This is either a question or a feature request <BR /><BR /> I'd like to be able to put a standalone AP in monitor mode to be able to sniff all the packets it can hear. <BR /><BR /> The reason being that I'd rather buy a RW AP with this feature, than a capture device like AirPcap or airodump-ng that quite frankly doesn't work the way it should. Also there are no more than 2x2 devices out there. <BR /><BR /> There is this option in ZD now and there is an option in the CLI of the AP, but I'm having problems setting it up to make it useful. <BR /><BR /> I've found out that I need to have a radio on which to capture on enabled and then set the capture in cli to stream. Then I get about 20 capture interfaces from the AP and I can capture on some of them. <BR /><BR /> I've been testing for a few minutes now and it seems to me that only control frames are passed. <BR /><BR /> Does anyone know how to setup the AP properly to capture frames? Wed, 18 Sep 2013 11:30:13 GMT primoz_marinsek 2013-09-18T11:30:13Z Capturing frames on stand-alone APs https://community.ruckuswireless.com/t5/ZoneDirector/Capturing-frames-on-stand-alone-APs/m-p/17359#M3722 This is either a question or a feature request <BR /><BR /> I'd like to be able to put a standalone AP in monitor mode to be able to sniff all the packets it can hear. <BR /><BR /> The reason being that I'd rather buy a RW AP with this feature, than a capture device like AirPcap or airodump-ng that quite frankly doesn't work the way it should. Also there are no more than 2x2 devices out there. <BR /><BR /> There is this option in ZD now and there is an option in the CLI of the AP, but I'm having problems setting it up to make it useful. <BR /><BR /> I've found out that I need to have a radio on which to capture on enabled and then set the capture in cli to stream. Then I get about 20 capture interfaces from the AP and I can capture on some of them. <BR /><BR /> I've been testing for a few minutes now and it seems to me that only control frames are passed. <BR /><BR /> Does anyone know how to setup the AP properly to capture frames? Wed, 18 Sep 2013 11:30:13 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Capturing-frames-on-stand-alone-APs/m-p/17359#M3722 primoz_marinsek 2013-09-18T11:30:13Z