https://community.ruckuswireless.com/t5/ZoneDirector/How-to-Retains-the-OIDIndex-values-of-the-Interfaces-in-Access/m-p/15315#M3318 How to Retains the OIDIndex values of the Access points Interfaces..??? <BR /><BR /> For Ruckus Access Points, OIDindex value of the resources-wlan0/wlan32 is getting changed whenever the device is getting reboots/down. Randomly its happening for few Access points. <BR /><BR /> For Ex: In Cisco, There is a command called "snmp-server ifindex persist" which provides an OIDindex (ifIndex) value that is retained and used when the router reboots. <BR /><BR /> So is there any wait to retain the OID interface Values in Ruckus Access Points Also after the reboots..? Wed, 26 Nov 2014 05:01:26 GMT arun_vs 2014-11-26T05:01:26Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-Retains-the-OIDIndex-values-of-the-Interfaces-in-Access/m-p/15315#M3318 How to Retains the OIDIndex values of the Access points Interfaces..??? <BR /><BR /> For Ruckus Access Points, OIDindex value of the resources-wlan0/wlan32 is getting changed whenever the device is getting reboots/down. Randomly its happening for few Access points. <BR /><BR /> For Ex: In Cisco, There is a command called "snmp-server ifindex persist" which provides an OIDindex (ifIndex) value that is retained and used when the router reboots. <BR /><BR /> So is there any wait to retain the OID interface Values in Ruckus Access Points Also after the reboots..? Wed, 26 Nov 2014 05:01:26 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-Retains-the-OIDIndex-values-of-the-Interfaces-in-Access/m-p/15315#M3318 arun_vs 2014-11-26T05:01:26Z