topic Re: I Can't Define the bandwidth limit in ZoneDirector

I Can't Define the bandwidth limit

gregory_hougard — Mon, 12 Sep 2016 14:26:13 GMT

Hello,

When I set the bandwidth limit (of 3 Mbps, for example), I get the following message (see picture in french): The uplink must be between 0.1 and 200.
The ZD1200 is 9.13.1.0 build 11

Re: I Can't Define the bandwidth limit

michael_brado — Tue, 13 Sep 2016 18:05:43 GMT

Not a known bug that I can find, but 9.13.2 is current MR.
https://support.ruckuswireless.com/software/982-zd1200-9-12-3-0-28-mr3-software-release

Re: I Can't Define the bandwidth limit

gregory_hougard — Tue, 13 Sep 2016 18:39:46 GMT

Thank you for your reply.
I can not find the version 9.13.2

This is a beta version?

Re: I Can't Define the bandwidth limit

michael_brado — Tue, 13 Sep 2016 18:47:19 GMT

Oops, please stand by. Pending release notes finalization.

Re: I Can't Define the bandwidth limit

gregory_hougard — Wed, 21 Sep 2016 15:06:07 GMT

any good news

Re: I Can't Define the bandwidth limit

davidvine — Fri, 23 Sep 2016 00:10:10 GMT

I noticed that your messages are in FRENCH ... Do you have a problem with the windows language (difference between 1.0 and 1,0 ) ?

Re: I Can't Define the bandwidth limit

davidvine — Fri, 23 Sep 2016 00:26:39 GMT

To Michael Brado .... Thanks for the moderation, BUT I use FRENCH versions (and English) of software AND the decimal point is different in the two languages .. French windows uses (,) and English widows uses (.) .. I have had this issue MANY TIMES ... When you type 1,0 its taken as a TEXT not a number !

Re: I Can't Define the bandwidth limit

davidvine — Fri, 23 Sep 2016 00:36:37 GMT

IF you care to look at the image .... The text choice box is 1,0 (virgule) and the message is 0.1 - 200 (Zero POINT one) this is a recurrent problem with ENGLISH/FRENCH contradictions in Software...
Liaison montante doit être un NOMBRE entre 0.1 -200
Uplink must be a NUMBER between 0.1 -200

Re: I Can't Define the bandwidth limit

michael_brado — Fri, 23 Sep 2016 16:13:19 GMT

Welcome David, I'll have Tech Support create a ticket and bug with your details.
Thanks and best regards!

Re: I Can't Define the bandwidth limit

michael_brado — Fri, 23 Sep 2016 22:14:09 GMT

Ticket # 487622, JIRA bug ID ZF-15899.