https://community.ruckuswireless.com/t5/ZoneDirector/Can-I-Mesh-Zoneflex-2942-to-Zone-Flex-7343-using-the-Zone/m-p/14727#M3168 Fri, 13 Sep 2013 07:22:29 GMT mark_ganza 2013-09-13T07:22:29Z https://community.ruckuswireless.com/t5/ZoneDirector/Can-I-Mesh-Zoneflex-2942-to-Zone-Flex-7343-using-the-Zone/m-p/14727#M3168 Fri, 13 Sep 2013 07:22:29 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Can-I-Mesh-Zoneflex-2942-to-Zone-Flex-7343-using-the-Zone/m-p/14727#M3168 mark_ganza 2013-09-13T07:22:29Z https://community.ruckuswireless.com/t5/ZoneDirector/Can-I-Mesh-Zoneflex-2942-to-Zone-Flex-7343-using-the-Zone/m-p/14728#M3169 No <BR /><BR /> You can only mesh same radio types. 2942 is 11g so it can mesh only to another 11g, like 2741, but not 11gn. 7343 will mesh with 7341 or 7352, but not 7363 or 7372 for example as they are dual-band. <BR /><BR /> If I'm not mistaken 7321 will mesh with all except 11g. You just have to set the right frequency. Fri, 13 Sep 2013 12:05:12 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Can-I-Mesh-Zoneflex-2942-to-Zone-Flex-7343-using-the-Zone/m-p/14728#M3169 primoz_marinsek 2013-09-13T12:05:12Z https://community.ruckuswireless.com/t5/ZoneDirector/Can-I-Mesh-Zoneflex-2942-to-Zone-Flex-7343-using-the-Zone/m-p/14729#M3170 Hi Mark, <BR /><BR /> Please find the below link form our knowledge base about Mesh Compatibility between different APs. <BR /><BR /> <A href="https://support.ruckuswireless.com/answers/000001510" rel="nofollow">https://support.ruckuswireless.com/an...</A> <BR /><BR /> I hope it is helpful. Mon, 16 Sep 2013 03:41:49 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Can-I-Mesh-Zoneflex-2942-to-Zone-Flex-7343-using-the-Zone/m-p/14729#M3170 harish_kumar_56 2013-09-16T03:41:49Z