How do you delete a standalone AP out of FlexMaster?

drew_whitmore — Thu, 07 Aug 2014 17:58:36 GMT

We replaced a standalone AP but FlexMaster is continually showing the disconnected one in the reports. Is there a way to remove it manually from FlexMaster?

Re: How do you delete a standalone AP out of FlexMaster?

monnat_systems — Mon, 11 Aug 2014 08:24:31 GMT

Hello Drew,

I don't have an Flexmaster to do this however looked at FM docs for you. Here is the process. Please check and confirm to make sure that this is the correct steps. I used FM 9.5 user guide and it may vary little bit depending on your version so keep that in mind too.

https://support.ruckuswireless.com/do...

PDF Page # 195

Releasing Device Licenses. Devices can be released on a per-serial number basis:
1. Go to Configure > Common > Device Registration.
2. Click Registration Status.
3. Find the required Device Name in the table. Note the number of licenses consumed
in the Licenses column.
4. Click Delete in the Actions column and respond to the confirmation prompt.
FlexMaster deletes the device, releases the consumed license or licenses, and returns
you to the Registration Status page.
5. In the Registration Status page, verify that the device entry is deleted

hope this helps.

topic Re: How do you delete a standalone AP out of FlexMaster? in ZoneDirector

How do you delete a standalone AP out of FlexMaster?

Re: How do you delete a standalone AP out of FlexMaster?