https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13207#M2906 Hello,<BR /><BR />i have SmartRedundancy running with two ZD1200.<BR />If i use my DHCP with Option 43 to let my Access Points discover there Controller in a remote site do i have to provide both IPs of my Controllers? Same Question if i use DNS for Discovery. Two DNS Entries needed or is DNS Discovery not reccomendet for a SmartRedundancy Config?<BR /><BR />Thanks.<BR /><BR />Kind Regards<BR />Marco Thu, 10 Sep 2015 08:14:30 GMT marco_eichstet1 2015-09-10T08:14:30Z https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13207#M2906 Hello,<BR /><BR />i have SmartRedundancy running with two ZD1200.<BR />If i use my DHCP with Option 43 to let my Access Points discover there Controller in a remote site do i have to provide both IPs of my Controllers? Same Question if i use DNS for Discovery. Two DNS Entries needed or is DNS Discovery not reccomendet for a SmartRedundancy Config?<BR /><BR />Thanks.<BR /><BR />Kind Regards<BR />Marco Thu, 10 Sep 2015 08:14:30 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13207#M2906 marco_eichstet1 2015-09-10T08:14:30Z https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13208#M2907 when SR is in use, AP's know about their active and standby controller hence no need for seperate entries anywhere else as far as i know... Thu, 10 Sep 2015 16:41:09 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13208#M2907 monnat_systems 2015-09-10T16:41:09Z https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13209#M2908 Thanks!<BR />So in Case i provide just the IP from my Active ZD with DHCP Option 43 or DNS, i won't be able to provision a new AP. The new AP just know the IP from my active ZD. I have understood correctly?<BR /><BR />If this is the case, i think this is a behavior i can live with that. Fri, 11 Sep 2015 07:41:36 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13209#M2908 marco_eichstet1 2015-09-11T07:41:36Z https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13210#M2909 you can chk the same by runnning a "get director ip" command on AP managed by a controller in SR mode... Fri, 11 Sep 2015 07:59:32 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Access-Point-ZoneDirector-Discovery-with-SmartRedundancy/m-p/13210#M2909 monnat_systems 2015-09-11T07:59:32Z