topic Re: SNMP documentation for Zone Director 9.6 - missing? in ZoneDirector

SNMP documentation for Zone Director 9.6 - missing?

janusz_syrytczy — Wed, 11 Sep 2013 08:24:52 GMT

Hello,

I'm to create monitoring system using SNMP and need documentation. I already have:
* Ruckus WirelessTM ZoneFlexTM Access Point SNMP Reference Guide (for 9.6)
* Ruckus WirelessTM FlexMasterTM 9.6 SNMP Reference Guide
* Ruckus Wireless TM ZoneDirectorTM SNMP Reference Guide (for 9.5)

I read somewhere that SNMP has been upgraded siginificantly in 9.6 in comparison to 9.5. Can I have doc for it?

Thank you.

BTW, I'm to accomplish statistis breakdowns for customer of *one SSID* not AP (i.e.: cusotmer is using one SSID in a AP, multiple customers per AP):
* users and traffic per SSID in a AP / per group of AP in a venue, per group of AP in all venues, maybe other information as well.

I'm expecting to automate all of this using open source, I hope I can get all the information using SNMP.

Re: SNMP documentation for Zone Director 9.6 - missing?

keith_redfield — Wed, 11 Sep 2013 14:16:46 GMT

Hi J - https://support.ruckuswireless.com/do... so with that I think you've got everything.

You may want to also explore this thread: https://forums.ruckuswireless.com/ruc...

Re: SNMP documentation for Zone Director 9.6 - missing?

keith_redfield — Wed, 11 Sep 2013 17:16:25 GMT

I just located another document that should help and have published it as a KB article. It will be on the site in a couple of hours: https://support.ruckuswireless.com/an...

Re: SNMP documentation for Zone Director 9.6 - missing?

janusz_syrytczy — Thu, 12 Sep 2013 07:11:44 GMT

Thanks, what I'm missing is Ruckus WirelessTM ZoneDirectorTM SNMP Reference Guide for 9.6. I'm using 9.5 version for now, still didn't get to APs manual yet.

This Cacti thread is fine, but still very limited both in terms of information it gets about installation and features of Cacti it uses. Really hard job is to automate just everything. Of course it may satisfy clients' needs.

If I manage to do better, I'll post it here. I'm to test Cacti.

Re: SNMP documentation for Zone Director 9.6 - missing?

simon_eng — Thu, 12 Sep 2013 11:02:38 GMT

Not to jack your thread, but I've also found that certain OIDs or entire MIBs are missing from the MIB packaged download, specifically all of the OIDs that are AP or client specific. As an example, OID 1.3.6.1.6.3.1.1.5.2 is not in the MIB files.

Re: SNMP documentation for Zone Director 9.6 - missing?

linda_rudawitz — Wed, 18 Sep 2013 14:11:23 GMT

Adding to this mess, I just tried adding some of the OID's to our PRTG monitor (just to verify that the string does exist or not) and I get an error stating "No such instance". Yes, SNMP is set to V2 and community strings are correct. Odd.

Re: SNMP documentation for Zone Director 9.6 - missing?

keith_redfield — Wed, 18 Sep 2013 16:19:53 GMT

@Linda - there were some changes to our OIDs (evil we know, but unavoidable) at 9.5. So if you are running earlier code some of the OID's documented in 9.6 will fail out.

@Simon - I've passed your feedback along to the documentation team.

Re: SNMP documentation for Zone Director 9.6 - missing?

keith_redfield — Wed, 18 Sep 2013 21:00:07 GMT

Sorry gang - I think I was a little dense on this one...I just posted the ZoneDirector SNMP Reference Guide - https://support.ruckuswireless.com/do...