topic Re: configuration hotspot in ZoneDirector

configuration hotspot

daniel_aban_gut — Mon, 17 Nov 2014 21:48:38 GMT

Hi, please need help, I activate service hotspot in "ruckus device" but always authenticates, login and user over and over, with the same user.
Is there anyway to make auntentificacion just one time ?

Re: configuration hotspot

martin_martin — Mon, 17 Nov 2014 21:51:48 GMT

Can you please explain a bit more about your configuration.

1. what zone director you use
2. what version
3. what do you use as hotspot authentication server

kind regards

Re: configuration hotspot

daniel_aban_gut — Mon, 17 Nov 2014 22:09:26 GMT

model:ZD1006
version: 9.3.4.0 build 21
i dont have authentication server.

please help me with configuration?

regards,

Re: configuration hotspot

daniel_aban_gut — Mon, 17 Nov 2014 22:20:31 GMT

Re: configuration hotspot

martin_martin — Tue, 18 Nov 2014 07:55:12 GMT

You can try the internal hotspot setup, allthough I am not sure as of which version its in the ZD.

please see
https://support.ruckuswireless.com/an...

To give you a complete guideline on how to setup a radius server is outside the scope of this forum. I advise you to contact your Ruckus partner and let them guide you to install it.

Kind regards

Re: configuration hotspot

daniel_aban_gut — Wed, 19 Nov 2014 14:46:05 GMT

ok thanks you very much.

regards,

Re: configuration hotspot

daniel_aban_gut — Mon, 24 Nov 2014 13:10:39 GMT

one more question,
how i can configure hotspot ruckus with active directory??
please helpme.