https://community.ruckuswireless.com/t5/ZoneDirector/captive-portal-dns-address-instead-of-IP-address/m-p/12089#M2643 I've installed a public cert now called wifi.mydomain.com when i ordered the cert i got a SAN of wifi1.mydomain.com as i have a redundant controller. so i have backed up the cert from ZD1 and put it on ZD2 but it didn't let me choose that it needs to use the SAN if its failed over. is there a way of doing this? it looks like if you used a wild card cert it would ask you during installation? Mon, 17 Mar 2014 16:24:57 GMT gordon_taylor_6 2014-03-17T16:24:57Z https://community.ruckuswireless.com/t5/ZoneDirector/captive-portal-dns-address-instead-of-IP-address/m-p/12088#M2642 Is it possible to have the Web authentication or landing page to be set to a dns name like wifi.mydomain.com instead of the IP address of the Ruckus Zone Director so that i can install a real certificate to get rid of certificate errors when people connect via a phone etc? Mon, 10 Mar 2014 16:22:28 GMT https://community.ruckuswireless.com/t5/ZoneDirector/captive-portal-dns-address-instead-of-IP-address/m-p/12088#M2642 gordon_taylor_6 2014-03-10T16:22:28Z https://community.ruckuswireless.com/t5/ZoneDirector/captive-portal-dns-address-instead-of-IP-address/m-p/12089#M2643 I've installed a public cert now called wifi.mydomain.com when i ordered the cert i got a SAN of wifi1.mydomain.com as i have a redundant controller. so i have backed up the cert from ZD1 and put it on ZD2 but it didn't let me choose that it needs to use the SAN if its failed over. is there a way of doing this? it looks like if you used a wild card cert it would ask you during installation? Mon, 17 Mar 2014 16:24:57 GMT https://community.ruckuswireless.com/t5/ZoneDirector/captive-portal-dns-address-instead-of-IP-address/m-p/12089#M2643 gordon_taylor_6 2014-03-17T16:24:57Z https://community.ruckuswireless.com/t5/ZoneDirector/captive-portal-dns-address-instead-of-IP-address/m-p/12090#M2644 i've just tried to fail over and the guest access and captive portal don't work i just get page can not be displayed in IE so i think i need to tell it that its wifi1.mydomain.com is this possible using ssh? Mon, 17 Mar 2014 17:03:07 GMT https://community.ruckuswireless.com/t5/ZoneDirector/captive-portal-dns-address-instead-of-IP-address/m-p/12090#M2644 gordon_taylor_6 2014-03-17T17:03:07Z