https://community.ruckuswireless.com/t5/ZoneDirector/How-to-get-the-logs-from-the-ZD-using-console-or-via-CLI/m-p/11986#M2616 How to get the logs from the ZD using console or via CLI? I have here my zd1200 but the ethernet ports are defective and I want to get the logs and sent it to ruckus so we can Identify the root cause of the problem. Fri, 07 Jul 2017 02:50:35 GMT romel_subala 2017-07-07T02:50:35Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-get-the-logs-from-the-ZD-using-console-or-via-CLI/m-p/11986#M2616 How to get the logs from the ZD using console or via CLI? I have here my zd1200 but the ethernet ports are defective and I want to get the logs and sent it to ruckus so we can Identify the root cause of the problem. Fri, 07 Jul 2017 02:50:35 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-get-the-logs-from-the-ZD-using-console-or-via-CLI/m-p/11986#M2616 romel_subala 2017-07-07T02:50:35Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-get-the-logs-from-the-ZD-using-console-or-via-CLI/m-p/11987#M2617 Hi Romel,<BR /><BR />Use console cable (baudrate&nbsp;115200) to access CLI and run below commands to save the debug in tftp server.<BR /><PRE>ruckus&gt; enable<BR />ruckus# debug<BR />ruckus(debug)# save_debug_info <IP address="" of="" tftp="" server=""> debuginfo.dbg<B> </B></IP></PRE>Regards,<BR />Abilash PR Fri, 07 Jul 2017 03:27:59 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-get-the-logs-from-the-ZD-using-console-or-via-CLI/m-p/11987#M2617 abilash_p_r 2017-07-07T03:27:59Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-get-the-logs-from-the-ZD-using-console-or-via-CLI/m-p/11988#M2618 THANKS ALOT ABILASH Fri, 07 Jul 2017 03:32:21 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-get-the-logs-from-the-ZD-using-console-or-via-CLI/m-p/11988#M2618 romel_subala 2017-07-07T03:32:21Z