https://community.ruckuswireless.com/t5/ZoneDirector/Autonomous-Backup-WLAN/m-p/11472#M2436 Hi, <BR /><BR /> whould be great if i can create a autonomous WLAN and mark this for "Backup" only. This WLAN gets only enabled if my AP restarts after X Minutes (Settings: AP "Auto-Recovery") and still have no Connection to my ZoneDirector. <BR /><BR /> It whould be also nice to map such a "Autonomous Backup WLAN" to a Zero-IT WLAN. If such a mapping exists the User should get provisioned both WLANs on his Device. <BR /><BR /> In combination with Zero-IT the Backup WLAN could be provide pretty easy. Because the WLAN gets only enabled if AP restarts after ZD Failure i think there is no Security issue. <BR /> If you use Zero-IT with DPSK, the ZD has a Hardware Failure and you don't want to activate each Device again for DPSK you still have to use SmartRedundancy. <BR /><BR /> Best Regards <BR /> Marco Sat, 08 Nov 2014 15:32:17 GMT marco_eichstet1 2014-11-08T15:32:17Z https://community.ruckuswireless.com/t5/ZoneDirector/Autonomous-Backup-WLAN/m-p/11472#M2436 Hi, <BR /><BR /> whould be great if i can create a autonomous WLAN and mark this for "Backup" only. This WLAN gets only enabled if my AP restarts after X Minutes (Settings: AP "Auto-Recovery") and still have no Connection to my ZoneDirector. <BR /><BR /> It whould be also nice to map such a "Autonomous Backup WLAN" to a Zero-IT WLAN. If such a mapping exists the User should get provisioned both WLANs on his Device. <BR /><BR /> In combination with Zero-IT the Backup WLAN could be provide pretty easy. Because the WLAN gets only enabled if AP restarts after ZD Failure i think there is no Security issue. <BR /> If you use Zero-IT with DPSK, the ZD has a Hardware Failure and you don't want to activate each Device again for DPSK you still have to use SmartRedundancy. <BR /><BR /> Best Regards <BR /> Marco Sat, 08 Nov 2014 15:32:17 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Autonomous-Backup-WLAN/m-p/11472#M2436 marco_eichstet1 2014-11-08T15:32:17Z