https://community.ruckuswireless.com/t5/ZoneDirector/Zone-Director-3000-will-not-boot-up-solid-red-light/m-p/11426#M2425 Hi Gerard,<BR /><BR />If this is the only message you are seeing and you get no response on the Serial port connection then the only option is to RMA the device.<BR /><BR />Kind regards<BR />Martin Wed, 27 Dec 2017 09:12:00 GMT martin_martin 2017-12-27T09:12:00Z https://community.ruckuswireless.com/t5/ZoneDirector/Zone-Director-3000-will-not-boot-up-solid-red-light/m-p/11425#M2424 I have a Zone Director 3000 that will not boot up red light and get message kernel (hd0,2)/bzImage console=ttyS0,115200n8 root=/dev/hda3 ro quiet [Linux-bzImage, setup=0x2e00, size=0x2442e0] tried to get to stateup but will not think there is an issue with flash Sat, 23 Dec 2017 07:11:25 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Zone-Director-3000-will-not-boot-up-solid-red-light/m-p/11425#M2424 gerard_sanderso 2017-12-23T07:11:25Z https://community.ruckuswireless.com/t5/ZoneDirector/Zone-Director-3000-will-not-boot-up-solid-red-light/m-p/11426#M2425 Hi Gerard,<BR /><BR />If this is the only message you are seeing and you get no response on the Serial port connection then the only option is to RMA the device.<BR /><BR />Kind regards<BR />Martin Wed, 27 Dec 2017 09:12:00 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Zone-Director-3000-will-not-boot-up-solid-red-light/m-p/11426#M2425 martin_martin 2017-12-27T09:12:00Z