topic Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface in ZoneDirector

zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

salvador_alcant — Wed, 20 Dec 2017 16:28:45 GMT

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

paul_van_der_cr — Wed, 20 Dec 2017 17:10:12 GMT

do you mean that after a power failure you fallback to the configuration wizard?

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

igor_tunakin — Thu, 21 Dec 2017 06:48:15 GMT

How old is it? It can be due to CMOS battery.
My experience shows that the CMOS battery in noutbooks lasts about 5-7 years before it needs to be replaced.
Take a look at this link:
http://www.insearchoftech.com/2012/03/25/inside-wireless-hardware-part-1/

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

salvador_alcant — Thu, 04 Jan 2018 21:58:01 GMT

Thank you very much, I'll check it next week, I'm on vacation, I did not imagine it was battery-powered, I hope that's it.

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

salvador_alcant — Mon, 08 Jan 2018 18:45:16 GMT

so is

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

salvador_alcant — Mon, 08 Jan 2018 18:47:12 GMT

Hi, I already removed it but this model does not have the battery

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

salvador_alcant — Mon, 08 Jan 2018 18:49:46 GMT

I do not know if it has to do with this
Jan 8 18:48:45 ruckus syslog: xSaveFile():Unable to save to /etc/airespider/license-list.xml: No space left on device

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

salvador_alcant — Tue, 09 Jan 2018 23:12:56 GMT

gracias por sus respuestas lo solucione con un reset 30-30-30 como el que se usa en ubiquiti

Re: zonedirector 1000 does not save configuration each one that stays without energy gives me the configuration interface

salvador_alcant — Tue, 09 Jan 2018 23:13:25 GMT

thank you for your answers, solve it with a 30-30-30 reset like the one used in ubiquiti