topic Re: one AP with 3 SSID and 3 subnet in ZoneDirector

one AP with 3 SSID and 3 subnet

cedric_bantigni — Mon, 18 Jun 2018 12:54:51 GMT

hello,

is it possible to do this ?

I want with one AP (r300) and ZD 1200, have 3 SSID and 1 difféerent subnet.

example:

SSID 1 with subnet 1

SSID 2 with subnet 2

SSID 3 with subnet 3

and these 3 SSID get ip by the same DHCP server.

between AP and Dhcp server, there is one routeur configure on relay DHCP.

thank's for your help

Re: one AP with 3 SSID and 3 subnet

chbane_mohamed — Mon, 18 Jun 2018 13:16:41 GMT

Yes it's possible, just the port of the access point should be trunk

Re: one AP with 3 SSID and 3 subnet

shane_ferguson — Mon, 18 Jun 2018 21:21:24 GMT

In addition to Chbane's comment you will need to assign the VLAN for each SSID by setting it in the Advance Section of each WLAN.

Re: one AP with 3 SSID and 3 subnet

cedric_bantigni — Tue, 19 Jun 2018 07:24:48 GMT

i assigned the vlan for each SSID but yhe routeur don't receive the query for relay DHCP for the vlan.
thank's for you help
can you say if I forgot one thing

Re: one AP with 3 SSID and 3 subnet

cedric_bantigni — Tue, 19 Jun 2018 07:58:45 GMT

thank's but the R300 has one port. there is a another parameter for more port ?

Re: one AP with 3 SSID and 3 subnet

shane_ferguson — Tue, 19 Jun 2018 08:19:07 GMT

The AP's port is configured as a trunk port, As I mentioned before the VLAN is specified with in advanced settings on each WLAN. Ensure that the port on the router or switch the AP is connected to is configured as a trunk port also (has tagged VLANS applied to it).

Also ensure that DHCP helper is setup correctly on each VLAN.

Re: one AP with 3 SSID and 3 subnet

chbane_mohamed — Tue, 19 Jun 2018 08:56:13 GMT

This one port should be trunk