https://community.ruckuswireless.com/t5/ZoneDirector/Cannot-connect-to-Internet-through-SSID-created/m-p/9502#M1867 Have a look at this KB <A href="https://support.ruckuswireless.com/answers/000001137" rel="nofollow">https://support.ruckuswireless.com/an...</A> on configuring an AP in standalone router mode. Sat, 10 Aug 2013 01:59:23 GMT keith_redfield 2013-08-10T01:59:23Z https://community.ruckuswireless.com/t5/ZoneDirector/Cannot-connect-to-Internet-through-SSID-created/m-p/9501#M1866 Have a Verizon router passing DMZ through to a NetGear router handling DHCP. <BR /><BR /> Ruckus is behind the NetGear. <BR /><BR /> When I plug directly into the Ruckus' ethernet port, I can get an IP address from the Netgear and I have Internet access. <BR /><BR /> However, when I create two new SSID on the Ruckus, I do not get an IP address from the Netgear nor do I get Internet. All I get is a 169.254.x.x. address. <BR /><BR /> If I set the wireless adapter to a static IP, I can get through to the Internet. For some reason, DHCP is not getting through to the wireless. <BR /><BR /> Cannot figure out why DHCP is not getting to wireless portion. Fri, 09 Aug 2013 19:10:34 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Cannot-connect-to-Internet-through-SSID-created/m-p/9501#M1866 daniel_monks_58 2013-08-09T19:10:34Z https://community.ruckuswireless.com/t5/ZoneDirector/Cannot-connect-to-Internet-through-SSID-created/m-p/9502#M1867 Have a look at this KB <A href="https://support.ruckuswireless.com/answers/000001137" rel="nofollow">https://support.ruckuswireless.com/an...</A> on configuring an AP in standalone router mode. Sat, 10 Aug 2013 01:59:23 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Cannot-connect-to-Internet-through-SSID-created/m-p/9502#M1867 keith_redfield 2013-08-10T01:59:23Z