https://community.ruckuswireless.com/t5/ZoneDirector/How-to-test-COA-Disconnect-Message-rfc-5176-support-for/m-p/9495#M1864 Enable 802.1x and RADIUS on the Adminster/Diagnostics page, and track a client MAC connecting to a DVLAN enabled WLAN.<BR /><BR />I cannot find the exact date for ZoneDirector, but I can confirm SmartZone has had rfc-5176 compliance since 2.5.1 release.<BR />Last I could find, SZ 3.2.1 patch for Framed-IP attributes value received not used for session validation or Acct-Terminating-cause<BR />is not sent back in 'accounting stop'.<BR /><BR />If you need assistance with troubleshooting, Tech Support would be able to assist. Thu, 26 May 2016 22:45:06 GMT michael_brado 2016-05-26T22:45:06Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-test-COA-Disconnect-Message-rfc-5176-support-for/m-p/9494#M1863 I am trying to test or find any documentation regarding this. Is there a quick way to test if my ZoneDirector device supports COA Disconnect-Message (rfc 5176)? Mon, 23 May 2016 21:29:51 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-test-COA-Disconnect-Message-rfc-5176-support-for/m-p/9494#M1863 jezeniel_zapant 2016-05-23T21:29:51Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-test-COA-Disconnect-Message-rfc-5176-support-for/m-p/9495#M1864 Enable 802.1x and RADIUS on the Adminster/Diagnostics page, and track a client MAC connecting to a DVLAN enabled WLAN.<BR /><BR />I cannot find the exact date for ZoneDirector, but I can confirm SmartZone has had rfc-5176 compliance since 2.5.1 release.<BR />Last I could find, SZ 3.2.1 patch for Framed-IP attributes value received not used for session validation or Acct-Terminating-cause<BR />is not sent back in 'accounting stop'.<BR /><BR />If you need assistance with troubleshooting, Tech Support would be able to assist. Thu, 26 May 2016 22:45:06 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-test-COA-Disconnect-Message-rfc-5176-support-for/m-p/9495#M1864 michael_brado 2016-05-26T22:45:06Z