https://community.ruckuswireless.com/t5/ZoneDirector/How-to-upgrade-Zonelfex-7962-Firmware-without-a-Zone-Director-on/m-p/9493#M1862 Hi Dee Bee, <BR /><BR /> You can try the upgrading via option - Upgrading Manually via Local File. this would suit you the most. <BR /><BR /> refer to PDF page no 111 on <A href="https://support.ruckuswireless.com/documents/212-zoneflex-release-9-4-indoor-ap-user-guide/download" rel="nofollow">https://support.ruckuswireless.com/do...</A> <BR /><BR /> hope this helps. Mon, 20 Oct 2014 17:27:53 GMT monnat_systems 2014-10-20T17:27:53Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-upgrade-Zonelfex-7962-Firmware-without-a-Zone-Director-on/m-p/9492#M1861 I am using the Zoneflex 7962 in standalone mode (an an AP connected to a wired router). I want to upgrade the firmware and any software for it. Is there a recommended procedure if there s no Zone Director on the network? <BR /><BR /> I would prefer not to use a server via the Internet and also would rather not go through setting up a dedicated server on the LAN. This is for SMB use and it is a peer to peer network. Mon, 20 Oct 2014 16:40:34 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-upgrade-Zonelfex-7962-Firmware-without-a-Zone-Director-on/m-p/9492#M1861 dee_bee_6873179 2014-10-20T16:40:34Z https://community.ruckuswireless.com/t5/ZoneDirector/How-to-upgrade-Zonelfex-7962-Firmware-without-a-Zone-Director-on/m-p/9493#M1862 Hi Dee Bee, <BR /><BR /> You can try the upgrading via option - Upgrading Manually via Local File. this would suit you the most. <BR /><BR /> refer to PDF page no 111 on <A href="https://support.ruckuswireless.com/documents/212-zoneflex-release-9-4-indoor-ap-user-guide/download" rel="nofollow">https://support.ruckuswireless.com/do...</A> <BR /><BR /> hope this helps. Mon, 20 Oct 2014 17:27:53 GMT https://community.ruckuswireless.com/t5/ZoneDirector/How-to-upgrade-Zonelfex-7962-Firmware-without-a-Zone-Director-on/m-p/9493#M1862 monnat_systems 2014-10-20T17:27:53Z