https://community.ruckuswireless.com/t5/ZoneDirector/Vlan-Tagging/m-p/9217#M1815 Hi. <BR /> I am setting up ruckus wifi in a mall. My primary router ip is 10.26.0.65/27 on vlan 200. I am using a layer 3 switch ip 10.26.0.66/27 vlan 400. My APs are connected to gigabit trunk ports. I am trying to set up a management Vlan into the APs using set interface eth1 type vlan-trunk untag 400 but it isnt successful. Which command should i use <BR /><BR /> David Fri, 14 Feb 2014 06:10:21 GMT david_mudemb 2014-02-14T06:10:21Z https://community.ruckuswireless.com/t5/ZoneDirector/Vlan-Tagging/m-p/9217#M1815 Hi. <BR /> I am setting up ruckus wifi in a mall. My primary router ip is 10.26.0.65/27 on vlan 200. I am using a layer 3 switch ip 10.26.0.66/27 vlan 400. My APs are connected to gigabit trunk ports. I am trying to set up a management Vlan into the APs using set interface eth1 type vlan-trunk untag 400 but it isnt successful. Which command should i use <BR /><BR /> David Fri, 14 Feb 2014 06:10:21 GMT https://community.ruckuswireless.com/t5/ZoneDirector/Vlan-Tagging/m-p/9217#M1815 david_mudemb 2014-02-14T06:10:21Z