https://community.ruckuswireless.com/t5/ZoneDirector/POE-Injector-with-7731-not-powering-the-device/m-p/9155#M1796 I am installing a 7731, when I connect the 7731 device to the AP/BRIDGE port of the included POE injector, the red light on the POE injector turns off, and the 7731 does not get power. Any ideas? Tue, 06 Aug 2013 17:31:09 GMT donald_curry_58 2013-08-06T17:31:09Z https://community.ruckuswireless.com/t5/ZoneDirector/POE-Injector-with-7731-not-powering-the-device/m-p/9155#M1796 I am installing a 7731, when I connect the 7731 device to the AP/BRIDGE port of the included POE injector, the red light on the POE injector turns off, and the 7731 does not get power. Any ideas? Tue, 06 Aug 2013 17:31:09 GMT https://community.ruckuswireless.com/t5/ZoneDirector/POE-Injector-with-7731-not-powering-the-device/m-p/9155#M1796 donald_curry_58 2013-08-06T17:31:09Z https://community.ruckuswireless.com/t5/ZoneDirector/POE-Injector-with-7731-not-powering-the-device/m-p/9156#M1797 Have you tried the PoE that comes with the other 7731? Wed, 07 Aug 2013 06:52:55 GMT https://community.ruckuswireless.com/t5/ZoneDirector/POE-Injector-with-7731-not-powering-the-device/m-p/9156#M1797 matthew_mills_5 2013-08-07T06:52:55Z https://community.ruckuswireless.com/t5/ZoneDirector/POE-Injector-with-7731-not-powering-the-device/m-p/9157#M1798 I had similar issues. I ended up resolving my issue using PowerDsine 3501G midspans. <BR /><BR /> Now since I'm in Minnesota, I bought the PowerDsine 9000 series midspan so as to provide 802.3at power to enable the internal heaters if needed during the winter months. Wed, 13 Nov 2013 21:59:26 GMT https://community.ruckuswireless.com/t5/ZoneDirector/POE-Injector-with-7731-not-powering-the-device/m-p/9157#M1798 it_registration 2013-11-13T21:59:26Z