https://community.ruckuswireless.com/t5/ZoneDirector/ZoneDirector-to-Virtual-SmartZone/m-p/7836#M1407 I've got 3 existing sites, each with their own ZD1200 (running 10.1 firmware). We're planning to move to Virtual Smart Zone hosted at one location. I see that there is an option to import WAPs from a ZD into the vSZ under the Admin menu. However, I'm wondering if it is possible to import the entire ZD configuration into a zone on the vSZ - (ending up with 3 separate zones, one for each original ZD). I want to pull in all of the config info - WLANs, Guest Access, dPSKs, etc. versus having to rebuild from scratch. Any chance that's an option? Tue, 29 May 2018 16:31:37 GMT james_vavra 2018-05-29T16:31:37Z https://community.ruckuswireless.com/t5/ZoneDirector/ZoneDirector-to-Virtual-SmartZone/m-p/7836#M1407 I've got 3 existing sites, each with their own ZD1200 (running 10.1 firmware). We're planning to move to Virtual Smart Zone hosted at one location. I see that there is an option to import WAPs from a ZD into the vSZ under the Admin menu. However, I'm wondering if it is possible to import the entire ZD configuration into a zone on the vSZ - (ending up with 3 separate zones, one for each original ZD). I want to pull in all of the config info - WLANs, Guest Access, dPSKs, etc. versus having to rebuild from scratch. Any chance that's an option? Tue, 29 May 2018 16:31:37 GMT https://community.ruckuswireless.com/t5/ZoneDirector/ZoneDirector-to-Virtual-SmartZone/m-p/7836#M1407 james_vavra 2018-05-29T16:31:37Z