https://community.ruckuswireless.com/t5/ZoneDirector/R300-appears-dead-perhaps-a-botched-firmware-upgrade/m-p/7653#M1343 Eivind Hagen, <BR /><BR /> looks like it is bricked now. Proceed with getting it replaced now by contacting Ruckus Support. <BR /><BR /> cheers Sat, 04 Oct 2014 06:26:11 GMT monnat_systems 2014-10-04T06:26:11Z https://community.ruckuswireless.com/t5/ZoneDirector/R300-appears-dead-perhaps-a-botched-firmware-upgrade/m-p/7652#M1342 I attempted to upgrade the firmware on an R300 unit, but immediately after the firmware file finished uploading (using the web upgrade page) I lost contact with the unit. I have tried the hard-reset procedure multiple times, and nothing seems to work. <BR /><BR /> Is it likely that a botched firmware upgrade will render the unit completely dead and unable to execute even a factory reset? <BR /><BR /> Any suggestions for what to try next? Fri, 03 Oct 2014 21:58:57 GMT https://community.ruckuswireless.com/t5/ZoneDirector/R300-appears-dead-perhaps-a-botched-firmware-upgrade/m-p/7652#M1342 eivind_hagen_68 2014-10-03T21:58:57Z https://community.ruckuswireless.com/t5/ZoneDirector/R300-appears-dead-perhaps-a-botched-firmware-upgrade/m-p/7653#M1343 Eivind Hagen, <BR /><BR /> looks like it is bricked now. Proceed with getting it replaced now by contacting Ruckus Support. <BR /><BR /> cheers Sat, 04 Oct 2014 06:26:11 GMT https://community.ruckuswireless.com/t5/ZoneDirector/R300-appears-dead-perhaps-a-botched-firmware-upgrade/m-p/7653#M1343 monnat_systems 2014-10-04T06:26:11Z