https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-Configuration-question-for-wireless-network/m-p/15306#M849 your issue is that the 2530 procurve isn't a layer 3 switch, so it can't route traffic between these vlans. "The HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches" So while this switch supports putting traffic on different vlans, it doesn't support moving traffic between them. So you need either a router (not recommended but will work) or a layer 3 switch to handle that for you. Fri, 22 Nov 2013 06:24:29 GMT jeff_roback 2013-11-22T06:24:29Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-Configuration-question-for-wireless-network/m-p/15304#M847 Hi all, <BR /><BR /> This is my setup. <BR /><BR /> HP Procurve 2530 SWITCH on 192.168.1.2 <BR /><BR /> 2x VLANs <BR /> User VLAN: 20 <BR /> Public VLAN: 30 <BR /><BR /> Ruckus ZD1100 controller with 6x 7363 Access points with 2x SSIDs one for each VLAN. <BR /><BR /> Ports on the switch <BR /> 1-10 tagged (ZD100 wireless controller and 6x 7363 access points are plugged in here with static addresses from 192.168.1.11 to 17 <BR /><BR /> 11-40 Untagged VLAN 20 – user router plugged in with DHCP 192.168.1.x <BR /><BR /> 41-48 Untagged VLAN30 – public router plugged in with DHCP 192.168.2.x <BR /><BR /> When testing, i cannot connect wirelessly to the user SSID, doesnt get an address from DHCP. This configuration doesnt appear to work, what am I doing wrong? <BR /><BR /> If I place all the wireless kit on VLAN10 it will probably work fine, but I have been told to set it up as above. Fri, 15 Nov 2013 09:29:44 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-Configuration-question-for-wireless-network/m-p/15304#M847 david_marsh_611 2013-11-15T09:29:44Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-Configuration-question-for-wireless-network/m-p/15305#M848 VLANs 20 and 30 need to be tagged, and there needs to be DHCP and a def-gw router for each. Fri, 15 Nov 2013 23:11:06 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-Configuration-question-for-wireless-network/m-p/15305#M848 michael_brado 2013-11-15T23:11:06Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-Configuration-question-for-wireless-network/m-p/15306#M849 your issue is that the 2530 procurve isn't a layer 3 switch, so it can't route traffic between these vlans. "The HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches" So while this switch supports putting traffic on different vlans, it doesn't support moving traffic between them. So you need either a router (not recommended but will work) or a layer 3 switch to handle that for you. Fri, 22 Nov 2013 06:24:29 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-Configuration-question-for-wireless-network/m-p/15306#M849 jeff_roback 2013-11-22T06:24:29Z