https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-per-SSID-tagging-SCG200/m-p/8977#M429 I am stuck with an installation that needs the following:<BR /><OL><LI>2 x separate SSIDs broadcasting two different VLANs (VLAN 550 and VLAN 1241).</LI><LI>Traffic to be passed through a DSLAM (using 2 x PVCs configured on it).</LI><LI>ADSL2+ modem at customer side (configured with same PVC channels on DSLAM) to separate the 2 VLANs before passing to PoE IN of our ZF7782-S AP.</LI></OL><BR />We have already tested VLAN-per-SSID tagging and got it to work, however, this was done with L3 switches with following:<BR /><UL><LI>Trunk port configured with the two VLANs allowed (550 and 1241).</LI><LI>Native VLAN was changed from VLAN 1 to our Ruckus management VLAN (550).</LI></UL><BR />Note that only through our L3 switching scenario we managed to obtain the proper IP's from the pool. DSLAM scenario; we can only obtain IP from VLAN 550 whereas VLAN 1241 we can only obtain if we change our VLAN ID on our AP Zone to VLAN 1.<BR /><BR /><BR />If there is any special configuration needed for this setup please let us know. Wed, 18 Nov 2015 19:53:55 GMT vernon_wasile 2015-11-18T19:53:55Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-per-SSID-tagging-SCG200/m-p/8977#M429 I am stuck with an installation that needs the following:<BR /><OL><LI>2 x separate SSIDs broadcasting two different VLANs (VLAN 550 and VLAN 1241).</LI><LI>Traffic to be passed through a DSLAM (using 2 x PVCs configured on it).</LI><LI>ADSL2+ modem at customer side (configured with same PVC channels on DSLAM) to separate the 2 VLANs before passing to PoE IN of our ZF7782-S AP.</LI></OL><BR />We have already tested VLAN-per-SSID tagging and got it to work, however, this was done with L3 switches with following:<BR /><UL><LI>Trunk port configured with the two VLANs allowed (550 and 1241).</LI><LI>Native VLAN was changed from VLAN 1 to our Ruckus management VLAN (550).</LI></UL><BR />Note that only through our L3 switching scenario we managed to obtain the proper IP's from the pool. DSLAM scenario; we can only obtain IP from VLAN 550 whereas VLAN 1241 we can only obtain if we change our VLAN ID on our AP Zone to VLAN 1.<BR /><BR /><BR />If there is any special configuration needed for this setup please let us know. Wed, 18 Nov 2015 19:53:55 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/VLAN-per-SSID-tagging-SCG200/m-p/8977#M429 vernon_wasile 2015-11-18T19:53:55Z