https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/How-to-login-in-Command-Line-Interface-in-Ruckus-7762-with/m-p/6394#M293 Hi, It sounds like the AP has not been factory restet correctly, try the zd username and password as this will confirm if it has been reset. If this works it has not been reset, try factory resetting the AP again and the default credentials should work. User, super    Password, sp-admin  Tue, 16 May 2017 15:32:57 GMT gary_simants 2017-05-16T15:32:57Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/How-to-login-in-Command-Line-Interface-in-Ruckus-7762-with/m-p/6393#M292 I have a Ruckus 7762 which was managed by a ZD. Now, it was intended to make it work on standalone. After resetting the AP when I tried to  loging the CLI, the User Name : super Password: sp-admin  could n't be accepted.  I have tride User:Admin, Super , and Passwords: 1234, admin,passsword, etc found in several forums. But,  the system couldn't Accept. Please help. Tue, 16 May 2017 15:17:11 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/How-to-login-in-Command-Line-Interface-in-Ruckus-7762-with/m-p/6393#M292 menelik_yabowor 2017-05-16T15:17:11Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/How-to-login-in-Command-Line-Interface-in-Ruckus-7762-with/m-p/6394#M293 Hi, It sounds like the AP has not been factory restet correctly, try the zd username and password as this will confirm if it has been reset. If this works it has not been reset, try factory resetting the AP again and the default credentials should work. User, super    Password, sp-admin  Tue, 16 May 2017 15:32:57 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/How-to-login-in-Command-Line-Interface-in-Ruckus-7762-with/m-p/6394#M293 gary_simants 2017-05-16T15:32:57Z