topic Re: vlan access across FlexZone 7363 access point in Wireless Questions and Best Practices

vlan access across FlexZone 7363 access point

nicolaas_g_lden — Mon, 17 Jun 2013 13:56:08 GMT

Hi,

How do i allow multiple vlans access across the zoneflex 7363 wireless access point?

i seem to to be able to ping devices on my new vlan thats on the access point.

i have set up a trunk port for the access point and the device is connected to a wlan that tags the traffic to the vlan.

Re: vlan access across FlexZone 7363 access point

srinivas_kudama — Mon, 17 Jun 2013 14:42:46 GMT

Multiple VLAN's can be allowed in the access point by making the ethernet port as Trunk.

Here are the few commands to make the Access Point's port to Trunk.

Login to AP cli and provide the commands below:

rkscli: set interface type vlan-trunk untag 1
OK
rkscli: set ipaddr wan vlan
Ok
rkscli: reboot

- is the name of the Ethernet interface you are using to plug the AP into the switch, if the POE port is used it is "eth2" and so on(I used 7363 here).

Note: Enusure that you have DHCP server for each VLAN so that clisnts will get the ip addresses according to the VLAN setting.

Now, connect this AP to a switch port which is configured as Trunk that allows multiple VLAN's.
Now, go to Configuration > 2.4G or 5GHz and create the SSID and Tag the VLAN number. By doing this, clients connecting to this SSID will get ip address from that particular VLAN.

I hope this helps!

Cheers,
Srini

Re: vlan access across FlexZone 7363 access point

simon_young_604 — Tue, 29 Apr 2014 15:38:00 GMT

I have tried this and my 7363 says command is not recognised.

Roger

Re: vlan access across FlexZone 7363 access point

keith_redfield — Tue, 29 Apr 2014 15:41:35 GMT

Simon/Roger(?) - 2 questions:

Is your AP controlled by a ZD?
What version of ZoneFlex is running?

Re: vlan access across FlexZone 7363 access point

simon_young_604 — Tue, 29 Apr 2014 16:51:58 GMT

This reply was created from a merged topic originally titled
Trunk to ZoneFlex 7363.

I am trying to configure an AP to trunk to our switch.

If I configure the switchport to a trunk I lose connectivity with the AP'

I discovered this
https://forums.ruckuswireless.com/ruc...

But when I try it is says set interface is not an option?

Can anyone provide a simple guide on what is needed to be able to set a ZoneFlex 7363 to trunk to a switch.

Thanks

Re: vlan access across FlexZone 7363 access point

simon_young_604 — Tue, 29 Apr 2014 17:05:31 GMT

Hi this is Roger here - Simon is my co-worker - he setup the account but is now working on another project.

Anyway

Yes AP is controlled by a 3025

Version 9.0.0.0 build 56

We are imminently getting support back on this box so we can do the software upgrade to the latest version.

What I can't find though is a simple guide on how to trunk an AP to a switch?

Thanks

Roger