topic Re: Walled Garden not work with IPv6 in Wireless Questions and Best Practices

Walled Garden not work with IPv6

henri_godoy — Wed, 22 Aug 2018 13:44:08 GMT

I have a problem that is hindering the implementation of an ipv6 network for wireless users. Does walled garden not support IPv6? How can I solve this?

Thank you.

Re: Walled Garden not work with IPv6

roberto_hernand — Thu, 23 Aug 2018 00:31:34 GMT

Hi Henri,

There are some limitations with IPv6 depending on what products you are using. For example the unleashed software does not support IPv6. With ZoneDirector there are some limitations. Can you confirm what software you are using (AP version and also provisioning system version)?

Re: Walled Garden not work with IPv6

henri_godoy — Thu, 23 Aug 2018 12:34:31 GMT

Hi Roberto, thanks for reply.

I'm using Virtual SmartZone Essentials, versions:

Controller Version: 5.0.0.0.675
Control Plane Software Version 5.0.0.0.627
Ap Firmware Version: 5.0.0.0.753

Re: Walled Garden not work with IPv6

roberto_hernand — Thu, 23 Aug 2018 16:25:53 GMT

Hi Henri,

For Walled Garden Entry, only the formats below are supported :

- IP (e.g. 10.11.12.13)
- IP Range (e.g. 10.11.12.13-10.11.12.15)
- CIDR (e.g. 10.11.12.100/28)
- IP and mask (e.g. 10.11.12.13 255.255.255.0)
- Precise web site (e.g. www.ruckus.com)
- Web site with special regular expression like
- *.amazon.com
- *.com

This means that IPv6 definitions are not supported.